How to treat the floor in the bath

This Russian bath is built entirely of wood, but due to the fact that there is at the same time high humidity and high temperature, unexpected troubles arise. Most often affected floors. It is they who take on the maximum load. Deformation of the boards, mold and fungus, can appear fairly quickly. On the other hand, in the bath it is unacceptable to use chemical agents, since the fumes can cause serious harm to health. Bath should bring the owners health and good mood. It is important to choose the right way to treat the floor in the bath.

The floor in the bath, is considered a place that needs to be given increased attention. They make floors only from boards or thick beams that have been heat treated. The floor should lie on steady, thick lags. According to the technology, logs should be based on a special brickwork. By observing these conditions, it is possible to achieve the longest possible use of the floors in the bath.

Floor treatment in the bath

Experts in the field of construction of baths do not recommend painting floors. The only place where this is allowed? changing room Another reliable option is to finish the floor of the washroom with tiles. She is able to perfectly resist all the negative factors that occur in the bath. Wooden crate can only be laid in the steam room.

It is desirable to make the crate of coniferous trees, such as fir, pine, spruce, alder. When heated, this tree is able to release useful substances into the room air? phytoncides, which are very useful for humans, when inhaled, and in the bath, when the body is steamed out, are absorbed even by the skin. In addition, such a tree has a very low thermal conductivity, which contributes to the additional maintenance of the temperature in the room. Another plus of conifers is that they do not cause burns when touching these surfaces.

There are different opinions about whether to make the treatment of floors with various substances. Arguments and opinions set. After all, the construction of a bath can be quite expensive, and I want this wonderful building to serve as long as possible. The most reasonable option is to treat the wooden floor with solutions that are as environmentally friendly as possible and do not endanger human health.

How to choose an environmentally friendly bath product

Among the many tools for the treatment of internal wooden surfaces in the bath, there are not only effective, but also those that do not emit harmful fumes. These tools include oil formulations. Their peculiarity is that they are absorbed into the wood, and do not cover the surface with a film. This is a significant plus, because, therefore, in contact with surfaces treated with this tool, there is no burn. Clean and dry wooden surfaces with oil-based products. The composition is applied with a brush. The term of complete drying of the solution is not more than a day. After this bath is recommended to heat well.

You can not handle the wooden surface of the floor, but at the same time apply the tree, the last heat treatment. This material is much better resists not only high humidity, but also temperature. In addition, increased protection against pests that can undermine the floors.

Floor antiseptics

In modern stores appeared quite a large number of different materials for the treatment of floors in the bath. Such materials include, for example, varnish-impregnation. They are diluted with white spirit and applied with a thin layer on the surface of the wood.

There are various oils for impregnation. They appeared relatively recently, however, they proved themselves very well. These oils are not only highly effective, but also have the most important property for humans - they are absolutely safe for health. The composition is able to penetrate deep into the pores of wood.

Antiseptics are probably the best option on the market, as they protect the tree, including from insect damage, which can cause significant harm to the bath. In addition, floors are often prone to mold and mildew. In stores there is a fairly large selection of antiseptics. All of them are quite effective.

Floor protection from decay

Despite the treatment already carried out, there are cases when the floors still begin to darken and rot. In this case, you need to take action as soon as possible. In order to prevent damage to the floors, it is necessary to regularly dry the bath. In addition, if you notice a darkening on the floors, these parts need to be dismantled thoroughly and dried. Then the surface is treated with sandpaper. After this, re-treat the floor boards with an antiseptic and thoroughly dry. The final step is to wax the damaged area.

We also want to invite you to read the articles that describe the construction of the bath:

• The frame bath with his own hands.
• Bath foam blocks with their own hands.

Video

In this video you will hear answers to frequently asked questions regarding the floor in the bath: