How to repair a mosquito net

As you know, all living things love the light. Tom is not an exception midges, mosquitoes, flies, and more. In order to protect your house from insect invasions, mosquito nets can be installed on opening doors and windows of doors and windows. However, during operation, they can be damaged and breakdowns become very different. In this article we will look at the most common damage, as well as you will learn how to repair a mosquito net.

Common Damage

Generally speaking, mosquito nets become unusable for three reasons:

1. Time.
2. External factors.
3. Internal "aggressors".

There is another reason - poor quality equipment and improper installation. For example, if you are not living on the ground floor, then if you install it incorrectly, the risk of the grid falling from a great height increases. As a result, plastic elements may be damaged and the frame profile will bend. Also not without a breakthrough grid. In short, after a fall, the mosquito net will definitely need to be repaired, but in the worst case, a complete replacement.

So, how to determine that the grid needs to be repaired?

1. If there are curvature of the frame frame.
2. Waves appeared on the canvas of the net.
3. Mounts out of order.
4. The canvas broke through.
5. The product does not have the original appearance.

The most common failure is the breakthrough of the web. Especially in those cases if you have pets at home. Claws, teeth, beak and the like can easily damage the mesh. As a result, uninvited guests in the form of mosquitoes and black flies will fly into the apartment through breakthroughs.

Also, the cause of breakage may be in careless operation of the grid, sudden temperature changes and wear of accessories, as well as due to the effects of precipitation. In most cases, the problem is solved by one call to the appropriate company, where you can buy a new mosquito net. However, in order to save, you can fix the damage yourself.

How to eliminate a breakthrough

If there is a small breakthrough on the mosquito net, then you should not immediately spend money and buy a completely new canvas. Consider a simple method for eliminating this kind of breakdown. The work will be as follows:

• This will require a small piece of a suitable grid that could block the breakthrough. You can use the old mosquito net, if you have one.

• So, cut a suitable piece of mesh with a margin of 2.5 cm from all sides.
• After that, you will need a curved needle and a strong thread, preferably of the same color as the canvas. You can also use thin fishing line, which is practically not visible. Pay attention to the fact that you can use a regular straight needle. Curved is needed in case only one side of the grid is available to you.

• Now close the hole with the cut grid. Best of all, if you can remove it from the window. Next, it remains to sew a small stitches patch to the grid. Stitches moderately, otherwise there is a possibility that the mesh is deformed.

So it is very easy and quick to eliminate a small breakthrough in the grid. The only disadvantage of this method is aesthetics. Therefore, it is better to approach the issue of eliminating a breakthrough creatively. For example, cut a butterfly patchwork in a contrasting color or something else. You can connect the fantasy, and from the outside it will seem that the way it should be.

Replacing the canvas

However, there are times when installing the patch is not enough. In this case, you have to make a complete replacement of the cloth mosquito nets. For this, work should be done in this order:

1. To release the mesh around the perimeter at the interface, remove the cord.
2. Eliminate the old canvas.
3. New grid is put in place.
4. To tension the grid should be phased. You can start from the short side. Putting the net in the gutter, with the blunt side of a ballpoint pen or screwdriver, squeeze the cord back. Make sure that there are no folds.

1. Next, mount the grid on the second long side in the same way.
2. The most crucial stage is the tension of the third and fourth sides of the grid. Here, you may need to redo, as the grid can easily bend. Her tension should be planned.
3. Upon completion of work on the perimeter with a neatly sharp and thin knife, cut off the remnants of the mesh, flush with the profile.

This work can be done by hand, most importantly, do not be afraid to experiment.

Remount lunch

After a while, the handles on the mosquito net become brittle or, due to inaccurate use, may break. Without them, removing the grid will be problematic. How to be in this situation? For example, you can use a simple method for which you will need a small piece of steel wire O 2-3 mm. From it you make a small hook indicated in the photo:

With this hook, you can easily install and remove the grid from your seat. So, with one hand, wind the hook under the netting, and with the other you hold and at the same time press down the remaining pieces of the handles. So, you can set the grid on your seat.

This method in case you purchase new pens at the moment is impossible. But, on the other hand, this technology is quite dangerous, because with inaccurate movement the grid can fly down.
There is also another option that does not require such risks. You can make a flexible handle of small pieces of leather. Cut off the skin with a strip up to 2 cm wide and up to 10 cm long. Fold it in half. The result is a strap of 5 cm. The ends of the skin with a screw are fastened to the place of the last fastening. So, you will have two loops that will help remove and install the mosquito net on the seat.

Repair of a corner of a framework of a grid

Due to the fall or low-quality components in the design of the grid can break corners. Alternatively, you need to buy a new corner and make a complete replacement. To do this, remove all residues of the broken corner from the aluminum profile.

New neatly hammer in the profile with a rubber or wooden hammer. For the stand, you can use a wooden bar, in this case any hammer will work. The main thing is not to overdo it, because the corners are mostly plastic and may also break even at the stage of their installation.

If the corners are simply loosened, and you see that they could still serve, the grid frame can simply be strengthened. To do this, you can cut small corners of tin, round off sharp corners and fasten them on top of existing corners. You can also buy small furniture corners.

An important requirement is that they should be thin, otherwise the grid in the corners will not be tightly pressed against the window.

Z-profile replacement

On the plastic window, z-mounts from the outside can also break. It is installed mosquito net. Repair can be very simple, for example, buy a new one and install it in its place. Also, such fasteners can be made independently of tin. It is important to give it the necessary form. When the workpiece is done, you can fasten it with a screw to the window.

So, as we considered, there are many reasons why a mosquito net can break. On the one hand, you can always buy a new part to replace it, and on the other hand, some parts can be made independently. To help also offer a video on this topic.

Video

This video clearly shows how to repair mosquito nets: