How to make a fence of unedged boards

For the protection of summer cottages and suburban areas today are used designs of different materials: stone, metal, corrugated board and various types of wood. However, more often the owners of houses or cottages are thinking about how to make a fence from unedged boards - affordable and original fence that looks harmoniously against any landscape. In addition, such facilities are carried out easily and quickly, do not require the use of special equipment and tools, lengthy preparation and expensive materials from the performers.

Main technical and operational features of the material

As one of the cheapest and affordable sawn timber, unedged board is a product with partially sawed or completely uncut sawn. For its production mainly use hardwood and coniferous wood. Experts recommend for the construction of fences to give preference to larch, which is best suited for external structures and gaining maximum strength in a wet environment. The most unstable type of board is birch wood. Unedged board for the construction of fences are selected taking into account several factors:

1. Board structure Experts do not advise to buy boards with knots, as they are less tolerant of climatic and operational loads.
2. The quality of the cut. On the outer surfaces of the wood should not be obvious chips and potholes, which complicate the process of material processing.
3. The presence of cracks. This defect appears as a result of improper storage or drying of the material and may adversely affect the service life of the structure.
4. The cross section of the tree should look as correct and harmonious as possible.

Before you make a fence from unedged boards, it is necessary to cover the wood with special protective and antiseptic compounds. In addition, such impregnations give the material a beautiful, sophisticated tone, emphasizing the color and texture favorably. The compositions should be purchased only from reliable and trusted manufacturers, with the availability of specialized certificates of quality and environmental safety.

Preparation of materials

For the construction of the fence from unedged boards, it is necessary to purchase in advance and bring to the site a profile pipe for support posts with a section of 40x60 mm and a length of at least 3 meters. The total number of metal blanks depends on the complexity of the design and the size of the site. For the construction of the fence, select a high-quality unedged board with a width of 200 mm or more, a length of 2 meters or more, and a thickness of 20 mm. To deepen the support pillars, materials for the base and the concrete mortar should be prepared: cement, sand and crushed stone, as well as small pieces of reinforcement.

Like any other construction, the construction of the fence begins with a thorough measurement of the site and the planning of the territory. Based on the actual parameters of the site and the individual characteristics of its relief, they outline the location and height of the supporting pillars, future gates and wickets.

For load-bearing structures, the most affordable and easiest-to-process material is a metal pipe. Additional foundations for the fence of unedged boards is not required due to its ease and integrity of the structure.

The base of the supporting pillars is immersed in the soil, having previously made a preparatory cushion of sand and rubble in the ground. Depending on the characteristics of the soil on the site and the height of the fence, the depth of the pillars can be from 0.8 to 1.2 meters. The most optimal distance between the supports - 2.5 meters. Fixed pillars with concrete solution. While the concrete is gaining the necessary strength, the supports can be coated on top with a special anti-corrosion compound and painted in a pleasant color with moisture-resistant paint.

Technology of installation of elements of a fence from not cut board

At the final stage, transverse elements — horizontal lags — are attached to the prepared supports. In the future, they will be fixed boards. If according to a predetermined project, the main coverage is planned to be placed horizontally with an overlap or butt, then vertical support elements are additionally attached to the pre-crate, in increments of 0.6-0.8 meters.

Knowing how to make a fence from unedged boards and doing all the work strictly on technology, you can decorate your territory with a stylish and spectacular design that will harmoniously combine with wooden elements of a gazebo or landscape design.

Rough processing and relief forms of unedged boards will be a real decoration of the surrounding space, which can be stylishly complemented with paths made from saw cuts of wood or small enclosing structures on flowerbeds.

Video

In the following video, see about an interesting way to install a fence, which can be done from unedged boards: