How to insert glass into the door

The door with glass can decorate the interior. It visually expands the size of the room. Therefore, it is not surprising that most people choose glazed constructions in apartments, preferring them to ordinary deaf ones. Glass replacement is not a complicated procedure. It can be made completely independently. Sometimes you need to replace the old worn stained glass. In some cases it is necessary to glaze a blank door. This will require a bit more time and effort.

How to replace broken glass

If the installation of glass in the interior door is made in the nursery, the issue of security is particularly relevant. A good option for replacing glasses is triplex. This is a sandwich construction: several glasses are combined with an adhesive film. Crashed, triplex does not scatter into fragments. All pieces remain in the film.

1. To replace broken glass, you must first carefully remove the old one. At the preparatory work at the wizard will take more time than the installation. Often, when the doors are old, the beadings have not changed in them for a long time. The dismantling of the fragments remaining in the door will be problematic in this case. It is necessary to remove the old beadings and pick up new ones. Another necessary stage - measurements. In order to set the glass quality, it is necessary to precisely measure it out in width and height. If it is a little longer in the future, then it will have to be customized, cutting off the excess. But if in short, it is really a problem. Because such a workpiece can simply fall out of the opening.
2. The choice of glass is not only a matter of taste. It is also important to take into account its strength characteristics. The best option for the door - tempered glass. It is very durable, and when broken, it leaves practically safe shards.
3. When the preparatory work is completed, the glass and new beadings are ready, you just need to install it. It is easy and does not take much time. 90% of the quality of work depends on the correct measurements.

Installation in the dead door

First of all, you need to make an opening for the glazing. For this you have to learn a few simple rules.

Fastening plates can be installed both on glue and with the help of screws. The first option is more aesthetic.

1. Paneled glass door does not work, have to buy a new one. But the shield is quite suitable for such works.
2. When planning the opening it is important to remember that the indents from the sides must be at least 15-16 cm. Otherwise, the structure may be destroyed. Bottom is usually an indent of at least 40 cm, and above - about 10 cm.
3. It is necessary to buy mounting strips. They are of two types: flat and with a selected quarter.
4. When purchasing glass, it is necessary to take into account not only its size and design. It is better if it is tempered or triplex. However, for very small openings, a simple window will do. The question is rather in the strength and safety of the material.
5. The shape of the opening can be plain rectangular or figured. Beginners should start with a simple form. If it is complex, then it is transferred to the door leaf, superimposed drawing or stencil. Before applying the markup, the canvas is removed from the hinges. A good moment in order to carry out upgrades is the work to fix various problems with it. Glass can be a way to update the old canvas and give the door a new life.
6. When the form is drawn, it is necessary to determine its angles. Corner places are drilled with a drill. It is important not to press on the canvas, because it can crack.
7. On the drilled corners cut out a necessary form with a jigsaw.
8. The finished opening can be strengthened with side panels. This is necessary if there is a filler inside the door or it is hollow.
9. Much depends on the accuracy of the wizard at all stages of work, from marking up to installation.
10. After preparing the opening, it is necessary to install the pre-cut fixing strips.
11. First, the bar is set only on one side of the web. Then the glass is mounted in the opening, which is fixed by the other strips.
12. After installation, it remains only to give the door a beautiful look by painting the slats.

Markup

Glass can be decorated with various patterns to your liking. Sometimes there are several inserts in the interior door. It is necessary to perform such work taking into account the same requirements as for the installation of simple glass. You can make the original door by installing a stained glass window in it. However, this procedure requires experience.