Deprecated: preg_match(): Passing null to parameter #2 ($subject) of type string is deprecated in /web/blog-oremonte.ru/page.php on line 13
House of sip panels do it yourself - Blog about repair

House of sip panels do it yourself

03-01-2018
Useful

The construction industry is developing rapidly. Already today it is possible to build a large house with minimal cash outlay. Such a structure as a whole is not more expensive than a one-room apartment, and living conditions in it are even better.

To choose the right material for the upcoming construction is not always possible. Many developers do not have sufficient knowledge of materials science, so they have to believe advertising. Manufacturers use this, praising their goods and not objectively criticizing competitors. Most of the controversy is happening around the new technology of building construction - Canadian.

Such composite panels consist of a pair of special plates with a layer of insulation between them, which is used as expanded polystyrene or foam. Developers are attracted by this quality because of their qualities as well as the speed with which houses are built from it.

Benefits

Factory readiness is a guarantee of the quality of the future structure and an essential condition for reducing the time of its construction. They assemble SIP panels in the factory with modern equipment, which allows to control the strength of the whole structure. As a result, equipment is selected in such a way that there is no opportunity for assemblers to act independently, because this can result in marriage.

Piling

Sip panels are fairly lightweight material, so there is no need for a heavy foundation. For our structure there will be enough pile foundation, on top of which it is necessary to lay a binding beam.

Starting boards are laid and fastened with screws to the resulting base, after which you can proceed to the installation of sandwich panels. This material is connected according to the well-known principle groove-comb.

Tightness of the joints is achieved using mounting foam, which is necessary to handle the ends of each sheet of sandwich panels immediately before connecting to adjacent elements.

If you chose a strip foundation, then the assembly should be done a little differently. With this option, fixing the strapping board should be carried out directly to the composite panels, and not to the timber, as in the previous case.

The connection of vertical seams is carried out in the same way. With proper treatment, this method is suitable for mounting roofs and floors. As a result, we should have a solid structure without gaps through which a draft could penetrate. It is quite easy to build a house of vulture panels, and the result is a robust construction with high thermal insulation properties. Such structures do not shrink and do not crack, which is their clear advantage.

Save during construction can also be on the characteristics of the material, so they allow you to lay it without special equipment. Wet technologies are not used during assembly, so the construction of houses from a vulture panel is interseasonal.

Finish

For finishing brick buildings would require more strength and energy than in our case. The walls of the vulture panels are smooth, so for their plasterboard plasterboard does not require a leveling frame.

Sandwich panels easily incorporate screws and nails and hold there securely, which allows the use of any materials, be it natural stone, wooden lining or ceramic tile. On the vulture panels are well kept and adhesive mixtures. If the floor in the house is made of our material, then you can lay parquet on it, tile it or lay linoleum.

Choosing panel SIP

The manufacturer must be selected by carefully evaluating the quality of the materials used. For the assembly of panels required OSP-3 tile with a high level of moisture resistance. It should also have a level of formaldehyde emission E1 or lower, which is safe for health. In the middle of the panels should be self-extinguishing foam or polyurethane foam.

disadvantages

A sandwich panel is a material that does not allow water vapor to pass, so the structure of it is more like a thermos and needs regular ventilation. SIP panels have low sound insulation performance, although manufacturers insist on good sound absorption by foam.

Since the weather is unpredictable, and the construction will take at least a week, it is necessary that there are drainage holes in the ceilings. It is also recommended to look at the quality of filling the edges of the panels.

The fire resistance of buildings made of sandwich panels is not the highest, so when laying communications, you should contact an independent electrician who will help avoid problems. It is also worth taking care of fire alarms in each room. Thermal sensors will not be out of place.

As a result, we found out that the CIP panel, though good material, still has its flaws. To avoid problems will help some materials that need to impose additional structure.

We recommend to read:

  • water well drilling;
  • how much it costs to fill the foundation for the house;
  • how to make a polycarbonate fence.

Video

We offer to watch the video and learn about the advantages and disadvantages of using vulture panels.