Diy bath restoration

Any bath is not just a plumber, but a place where a person is used to relax and relax as much as possible from difficult everyday life. It is not surprising that with intensive use the bath loses its decorative properties as well as its technical characteristics due to the destruction of the enameled layer. Unfortunately, not everyone has the opportunity to purchase a new bath, and in some cases you want to leave the one that already exists, for example, if it is a cast-iron bath that retains heat well. In the article we will describe how the restoration of the bath takes place with your hands with liquid acrylic and enamel, how to restore the enamel of the cast-iron bath at home.

Brush enameling

This method is only suitable for those cases where after the destruction of the enamel a little time has passed and the deformation did not have time to touch the main layer of the bath. Enameling a bath with a brush is the most economical way to restore it, and therefore it can be called the most popular. This method does not require the purchase of special tools, nor the presence of any special skills.

So, first you need to clean the bath as much as possible. Under the cleaning should be understood not only washing, but also the removal of all layers of dirt, grease and sediment, which eventually settle on the surface of any bath. For capital cleaning of the bath from lime deposits it is better to use special means, since the durability of the enameling procedure itself depends on the quality of cleaning.

After cleaning, you must wait until the bath is completely dry. Even water droplets should not remain on it, because otherwise the enamel simply will not settle on some part of the surface.

Now you can apply enamel with a brush. You should not make the layer too thick, because there should be several such layers, and each time the enamel will have to dry completely. The layers of enamel can be, for example, three. By the way, enameling a bath with your own hands makes it possible to change the color of the bath and choose a shade to match the color of the interior. After the last layer dries, the bathroom can be used only after a day.

It should be noted that the subsequent cleaning of the bath should be sparing methods, that is, no abrasive materials.

With a spray bottle

This method is very similar to the previous one, with the only difference that it uses a spray gun instead of a brush. It is believed that the spray is optimal to use because it covers the surface with an even layer of enamel. The restoration of enamel baths in this way should be carried out only in a protective suit and always using a respirator. There are special professional sprays on sale that evenly spray any liquid, however, enamels from cans can also be used to restore the bath.

Acrylic liner

This method of restoration is one of the most expensive, but the result will be durable. In addition, environmental friendliness is important to many. And in this case, the acrylic liner also wins over the enamel applied by spraying or a brush.

Acrylic liner – это своего рода ванна в ванне, то есть нижний слой ванны остается тем же, а вот верхний – полностью обновленный. Для того чтобы создать акриловый вкладыш, мастеру понадобится измерить ванну во всех местах, включая изголовье и бортики. Производственным способом будет изготовленная ванна, которая по своим размерам почти полностью будет повторять то, что уже имеется у владельца помещения. Установка акрилового вкладыша не займет более двух часов, а прослужит она уж точно более десяти лет.

Bulk acrylic bath

This method also cannot be called very cheap, but the new bath will not only look like a new one, it will also have new properties for it. For example, tactile sensations will be incomparably better than before. In addition, there are almost no pores on the acrylic coating, which, albeit in small quantities, are still on the enamelled bath. Sometimes when using this method, the owners of the bath want to completely change its color, under the shade of the updated design of the bathroom. In addition, liquid acrylic has the ability to absorb sounds, and therefore now the pastime in the bath will become even more pleasant.

So, first you need to prepare the surface. It is best to use special tools for this, which are able to clean even deep lime deposits. Now you need to clean the surface of the sandpaper to such a state until the enamel is removed. The surface must be completely matte.

It may be necessary to do such cleansing several times and constantly wash off particles of enamel with water. At the end you need to degrease the surface and completely dry it.

In order to create a composition for the restoration of the bath bulk acrylic, you must purchase a base and hardener. The proportions must be fully observed so that the composition fully possesses the necessary properties. It is necessary to mix the base of the composition with the hardener until they are completely mixed, 5–10 minutes. Now you can apply the composition. This should be done very carefully. It is necessary to start from the side, gradually going down.

If there is an obvious thickening of the layer in one place, then it is better to smear it with a brush as gently as possible, since after drying the bath will always remain in this form.

This process is best to connect those people who can work meticulously and carefully.

The composition will thicken in about an hour, but it is recommended to use the bathroom only after a day, and it is better to wait even when the inner layer is completely connected to the old surface of the bath.

Video

See below for detailed instructions on the restoration of the bath with bulk acrylic:

Add a comment