Deprecated: preg_match(): Passing null to parameter #2 ($subject) of type string is deprecated in /web/blog-oremonte.ru/page.php on line 13
Concrete pool do it yourself - Blog about repair

Concrete pool do it yourself

18-07-2018
Useful

Building a pool is not the easiest thing, especially if it is a pool of concrete. However, with certain skills in construction, as well as remarkable patience, you can create a rest corner on your site. In hot weather, the pool will become a place to relax and at the same time decorate the appearance of the site. The pool will look great next to the rock garden, alpine slide and other decorative elements of the garden. In this article we will explain how to make a concrete pool with your own hands at the cottage, give step-by-step instructions, as well as video and photo materials.

Advantages and disadvantages

Before you build a concrete pool, you need to know in advance about its pros and cons. The main advantage of this design is that it is durable and inexpensive. Construction will require only concrete, waterproofing materials and finishing.

The lack of concrete construction in its static nature. Such a pool can not be transferred. And if mistakes are made during construction, you will have to rebuild the pool completely.

Video

General information about concrete pools in the video format:

How to build

The pool of concrete is built in several stages:

  • First you need to find the optimal place on the site. The pool should not be located where leaves and branches fall. Otherwise, it will have to be constantly cleaned. It is also better not to allow him to be in the shade. The design is desirable to put closer to the communication systems, because the pool needs water as well as a drain.
  • When the place is chosen, it is necessary to think over all the details of construction. The first thing to decide on is the future size and shape of the pool. The easiest way to make it round or rectangular. However, in some cases wizards create more complex forms. In size it should be about 15 to 20 square meters. Make it less than 15 square meters. meters of area is meaningless.
  • After the plan of the pool is made, it is necessary to mark the place and set the pegs along the edges.

  • The next stage is solid earthworks. If there is an opportunity, then it is better to bring in a vehicle. With the help of an excavator, it is much easier to dig a hole 2 meters deep. You can, however, make the depth and less. However, we must bear in mind that the pool should have a water level of about one and a half meters. But the bottom will still be located waterproofing and concrete. The cost of renting an excavator will cost the same as the cost of the work of the team of excavators. In this case, with the help of technology work will move much faster.
  • When the pit is ready, you need to pour sand on the bottom and tamp it down.
  • On sand the waterproofing layer keeps within. Usually it consists of roofing material and mastic. However, the master may use other materials. It is important to make sure that the water insulator slightly overlaps the walls. This will make the pool more durable.
  • The next stage is formwork. Between the formwork and the edges it is necessary to fill the concrete. When it hardens, the formwork can be removed. By the way, when digging the pit, one must remember that the dimensions of the pit and the pool will be different. On each side you need to make an allowance. The walls of the pit is better to do a little under the slope.
  • After removing the formwork pool is not ready. It is necessary to iron the walls and fill the floor in the pool. Iron is produced using a solution of concrete. The floor in the pool is then poured also with concrete. For extra strength, it can be reinforced.

When all the work described above has been completed, the pool is theoretically ready. However, we must not forget that he needs a drain system, as well as a decorative finish.

The water pumping system should be thought out already when formwork is installed.

Make a system of pumping water is easy. At the design stage should consider and ladder.

Care

The pool is polluted and may even bloom. To prevent flowering, you can use special formulations. Pool cleaning is required at least once a week. However, when installing a skimmer system, such procedures can be reduced to once a year.

The best option for cleaning the pool - skimmer system.

The skimmer system is designed so that cleaning takes place itself. In this case, the water in the pool does not even have to change. Another device is the overflow system. Usually it is not used in private pools, because it is very expensive. However, you can try to make it yourself.

To keep the pool from falling leaves and debris, you can protect it with a special dome. Such canopies today have become very popular. In appearance, they resemble greenhouses.

Tools for cleaning pools can be found in special stores, where there is everything necessary for reservoirs and similar systems.

How to decorate

The pool can be decorated and refined in different ways. First of all, it is necessary to trim its edges. To do this, you can lay tile or other material. Someone prefers to make a circular path of natural stone.

The swimming pool itself can be made fabulous, especially at night. To do this, just install under the water special LED flashlights. Such lamps can shine and sparkle, and can create a quiet glow.

Around the pool, you can also set the backlight. This will make the landscape of the site more expressive and give it additional charm. Having built a concrete pool, it would be simply unacceptable to leave it in the form of a stone bag. Arrangement of a rest corner is a must. If the construction of a concrete pool is hard work, then all other works should bring only pleasure. Installation of various systems such as additional lighting, water heating functions or decorating the sides does not take much time. If you wish, you can even install a fountain near the pool.

Heating

The pool is heated by a boiler. In the West, even in warm countries, it is installed on a mandatory basis.

In the conditions of the Russian climate, the installation of a swimming pool heating system is simply necessary, especially if it is planned to use the pool during the cool season.

With its help it becomes possible to adjust the temperature of the water. The optimum temperature should be at 26 degrees. The heating system runs on electricity when it comes to outdoor pools. Gas boilers can also be installed in buildings.

Video

You can also get acquainted with the process of building a concrete pool by watching the following video footage:

A photo