Children's slide in the country with their own hands

Each child's favorite place is a playground where you can play actively. The most favorite is the slide, on which even some adults are not against a ride. Today, in specialized stores you can find a huge range of playgrounds of different configuration, made of different materials. Naturally, such a purchase will be expensive, and it cannot be argued that the quality of the product will be appropriate. Therefore, more and more often parents decide to equip the playing area on their own. So, with minimal financial and time costs, a full-fledged children's slide in the country can do it yourself.

Security questions

Before you begin designing the layout, you should consider an important issue - security, which is in the first place among all requirements. Since the slide is intended for children, everything must be thought out in advance and calculated in order to exclude the slightest possibility of injury to a child. Security is determined by many characteristics:

• sustainability;
• strength;
• attractive appearance;
• functionality;
• ability to withstand heavy loads.

The best solution is to fix the structure on a concrete base or supports that are driven deep into the ground. The finishing material should be firmly fixed, and the descent from the slide - as safe as possible. To achieve this, experts recommend:

• pay attention to the evenness of the gutter;
• exclude the presence of sharp corners, burrs and bolts;
• provide a soft landing, for example, on sand or thick grass.

An equally important issue is to climb the hill. Ladder must be equipped with handrails on both sides. Additional protections are also welcome: stability and reliability. So, when choosing a tree as the main material, it is necessary to choose the fasteners correctly - nuts, washers and bolts. Descent guides are fixed on a special glue - this will ensure good sliding.

The stability of the roller coaster will provide even a simple foundation, and reliability depends on the choice of high-quality materials for assembling a children's slide and a playground.

Choosing a place for installation

Before you make a children's slide at the dacha, it is necessary to decide not only the design, but also the location. So, the ideal option would be a zone with a good view from all sides, it will allow parents to monitor their child all the time.

In most cases, the slide is installed on the playground, but you can also place it outside the complex. The location chosen should be both sunny and near trees or a building. An excellent option would be a playground next to the garden, at certain times a shadow will emanate from it, which means children will not overheat.

It is not recommended to place a children's slide in the household yard, next to the garage or other buildings. During the game, children can be injured by tools or scattered building materials.

What material to prefer?

Despite the huge range of building materials, only wood or metal will be suitable for arranging a children's slide. Despite the fact that the design will be of the same type for both the first and second variants, the manufacturing process will be completely different. This is explained by the fact that each material has its own characteristics, which should be considered before making the final choice and starting to study the technology of construction of the structure.

Metal children's slide

At the very beginning, it is worth paying attention to the fact that without a welding machine it will be quite difficult to make a slide. Therefore it is necessary to have the minimum skills and the welding machine itself. In addition, do not forget that the metal is a capricious material, which, when heated (during welding), can be deformed and bent. Any idea without special knowledge of working with metal can end up differently than was originally intended.

Despite this, it must be said that a children's slide made of metal has many advantages in comparison with wood:

• long service life;
• strength;
• reliability;
• does not bear danger to the life of the child if the installation technology is observed.

Wooden children's hill

The main advantage of wood is the ease of processing, which will require a standard set of power tools:

• drill;
• electric jigsaw;
• Bulgarian with special nozzles (for polishing wood).

Even a novice in the construction business can easily cope with the task. Unlike metal, a slide made of any lumber has practically no flaws, and if they exist, they are insignificant and can be easily eliminated. For example, if it is necessary to protect the structure from moisture, it is enough to treat it with special means of protection, as well as paint it with any paintwork material. This will create a protective layer.

It is also worth noting that when considering the option of buying a ready-made children's play complex or slide, you can consider another option - plastic. In most cases, manufacturers combine it with wood or metal, so you can get a variety of shapes and designs of slides.

Everyone decides what material to use for the manufacture of children's slides. But, if you encounter a similar problem for the first time and do not have welding skills, then the choice is obvious - wood.

There is another "but" when choosing a metal. Scrap metal collectors can take advantage of the lack of home owners and recycle the structure.

Manufacturing principle

As already mentioned, the terrain is chosen first. The best option would be a hill. After measurements, you can begin to develop a layout. All drawings must have accurate calculations, which will allow us to prepare in advance the details of the desired size in the required quantity. When everything is ready, you can proceed to the immediate assembly:

1. First you need to make a platform that will be installed at the top. It is from her children will begin the descent. This stage is quite simple: a rectangle is assembled from a bar and is sheathed on one side with boards. It is better to give preference to a grooved board, since there will be practically no gaps and joints, and, therefore, the risk of injury to the product will be minimized.
2. When the platform is ready, it is necessary to attach legs to it, as a result of which a rather high stool is obtained. That is why the process of fastening is no different: 4 legs are attached at the corners. For greater stability, they are tied together by horizontal bridges in several places (depending on the height of the children's slide). So, for the slide, a height of 1.5 m, jumpers are required in the middle and below.
3. When the “stool” is fully ready, you can start creating a ladder, along which children will climb up. There is nothing complicated about this either: 2 parallel poles are installed, which are attached to the upper edge of the structure. To connect using horizontal crossbar, they will also perform the function of steps. If desired, and the availability of free time, you can construct a standard staircase with steps and risers. Safety lift ensure handrails. For their manufacture install several vertical supports, which are attached to the railing.
4. The main stage is the descent. It should be noted that for it you can use the same technology as when creating the stairs, with only one difference: a sheet of plywood is installed on the parallel poles. Also on the sides it is necessary to create a low limit so that the child does not fly out of the slide during the descent. For this, thick and wide planks are screwed from the sides, the height of which should be more than 10 cm above the plywood sheet.
5. The final stage will be grinding and painting the structure. All wooden elements must be free of burrs and sharp corners that can scratch the skin of a child. For these purposes, you can use the grinder with a special disk nozzle, which quickly clears all the irregularities. As a protective layer can be used as a varnish and paint. After the design dries, you need to install a sheet of tin on the trigger, ensuring perfect sliding.

At the final stage, you can show imagination. So, you can use several colors of paint to give a children's slide bright accents. On the descent, you can draw any picture using a carbon copy.

Some additional recommendations

When you create a children's slide with your own hands, you must remember the main rule: all stages must be carried out qualitatively, since the safety of your children will depend on this. In addition, you should follow several recommendations from experts:

1. When choosing lumber, you must check their quality. Also, all the elements are twisted, painted, and the nails are well hammered so that the caps do not stick out.
2. Around the hill should be a soft coating, which is chosen depending on your own preferences or situations. You can use: sand, thick grass (lawn) or artificial materials.
3. The legs of the stairs, as well as the lower parts of the stairs and the descent, must be immersed in the foundation. This will ensure maximum fastening and structural strength.
4. All the space around the roller coaster must be cleaned of unnecessary items, so that during games the kids do not stumble. Sticks, stones and glass should be removed.

Only high-quality children's slide will contribute to the proper development of the child, maintain his sports form and allow you to lead a healthy lifestyle. The playground is a kind of stimulator for the full development of the growing body. In addition, every child will enjoy daily fun and active games.

As you can see, it’s quite simple to design a children's slide with your own hands - you just need to follow the step-by-step instructions. In addition, the climb to the hill can be made not only in the form of a ladder. You can use the remaining 2 sides to equip other lifting options. They will also affect the proper development of the child's body. If you have free time and desire, you can develop a whole game complex, in which, besides the slide, there will be a sandpit and a swing.

We recommend to read:

• children's swing for giving the hands;
• how to make a pond in the country.

Video

You can learn about how to make a children's slide with your own hands from the video material, in which all the processes are gradually filmed: