Deprecated: preg_match(): Passing null to parameter #2 ($subject) of type string is deprecated in /web/blog-oremonte.ru/page.php on line 13
Waterproof laminate for bathroom - Blog about repair

Waterproof laminate for bathroom

01-02-2018
Laminate

The most familiar and proven solution for the floor in the bathroom is ceramic tile. More recently, nobody could even think about installing laminate in the bathroom. However, technologies are moving forward, and with them the quality of the laminated panel improves. Relatively recently, the market appeared waterproof laminate for the bathroom and kitchen, which is not afraid of not only moisture but also spilled water.

Features waterproof laminate

Fluid Resistance

Do not confuse moisture-resistant and waterproof laminate, in this article we are talking about waterproof coating, which does not deteriorate not only under the influence of moisture and evaporation, but also directly under the influence of water. Such improved properties of laminate due to the new technology of its production:

  1. All layers of the plate are pressed using high-pressure apparatus.
  2. The gaps between the layers are sealed with wax, previously heated to a certain temperature.
  3. The surface of the laminate is coated with a polymer that is water repellent.
  4. The basis of waterproof laminate is durable plastic.

Laminate Aqua Step

Note! The presence of air chambers in a plastic base does not affect the strength of the finished product. These cameras are designed to improve the heat and sound insulation of the material.

The main advantages of waterproof laminate:

  • Impact resistance.
  • Resistant to water and moisture.
  • Protection against the formation of mold and fungi.
  • Resistance to temperature changes.
  • Wide selection of decor.

Structure of waterproof laminate

The cost of waterproof laminate is much higher than its moisture-resistant counterpart. However, it is better to pay more if you need to protect the floors from damage and swelling. Plastic laminate for the bathroom is the perfect solution!

How to choose

How to choose

A wide range of waterproof laminate to meet the needs of every consumer, even the most whimsical. Thus, you can create an exceptional interior. What nuances should be considered when choosing waterproof laminate to the bathroom?

  1. Choose a coating with high wear resistance.
  2. The non-standard form of laminate, 400 × 400 or 1200 × 400, with a pronounced brilliance will help create a presentable floor.
  3. Pay attention to the lifespan, coating class and the degree of load that the coating can withstand. These indicators are usually indicated by the manufacturer on the package.

Note! The most vulnerable point of the laminate - lock connection. Choosing a coating, pay attention to the degree of their impregnation. The higher it is, the more stable the laminate.

With deep impregnation, the castle joint seems to be wet in appearance, and slippery to the touch. If it was processed with high quality, then an attempt to scrape off the wax with a fingernail would be unsuccessful. Otherwise, the laminate in the future under the influence of water is deformed.

Plastic slats in the bathroom

In order to ensure that the laminate is not deformed during operation, choose a floor that is produced by well-known manufacturers of floor coverings for bathrooms and kitchens that have long been established on the market.

Note! To avoid fakes, buy waterproof laminate in closed pavilions or specialized stores, which can provide a certificate of quality goods.

If you want to buy a coating with a long service life, then choose laminate 32 or 33 class. The quality of the material is so high that it is not uncommon (if you use laminate in the house, and not in the office or other public building) manufacturers give a lifetime warranty on it.

Features of installation of waterproof laminate

To level the base, use a self-leveling mixture.

Installation of waterproof laminate does not cause much difficulty. Therefore, this work is quite possible without the involvement of specialists. So, first prepare the bathroom. Mark the floor very carefully. Its surface should be as clean as possible. If you find irregularities and distortions, then make an additional tie, using a self-leveling mixture.

For waterproofing and cushioning, use a backing for laminated panels. Spread it across the floor, fixing the joints with masking tape. Lay the laminate from the far left corner, leaving 8–10 mm gaps along the walls. Due to this, when expanding the floor will not be deformed. Ultimately, the gaps will be closed by the plinth. Waterproof laminate must be laid so that the seams do not match.

Types of substrates for laminate

To cut the slats, you need a jigsaw, a pencil and a tape measure. Lock connection simplifies the process of laying the floor covering.

Note! With the help of a rubber mallet and a wooden block, you can fit the lamella close to each other.

Skirting can be selected in accordance with the color of the floor covering, and in tone with the doors, which can be completely different in color with the floor covering. If there is such a need, then the laminate can be easily dismantled or replace the damaged part.

So, waterproof laminate is highly reliable, it is warm to the touch and does not require special time costs for installation. This innovative technological solution will allow you to create a custom design in the bathroom. And more importantly, waterproof laminate is reliable and easy to maintain.

Video

Detailed information about the waterproof laminate Aqua Step you can get by watching the following video: