Is it possible to lay laminate on laminate

The market of flooring finishing materials today presents a huge range of products. But if we talk about affordable and practical options, then it is necessary to provide a laminate. Its operational life is long enough, especially if you treat it with care and care for it. True, sooner or later it also has to be changed, since the surface becomes unusable and loses its attractive appearance. In this case, fans of practical material think, and is it possible to put the laminate on the laminate? This would save both time and money that would be required to dismantle the old coating. It is necessary to carefully examine this issue and find out all the pros and cons.

Features flooring

Practical material in most cases is made of synthetic materials, because it has an indisputable advantage over expensive parquet. So, among its advantages can be identified:

• reasonable price;
• a large assortment;
• ease of installation;
• strength;
• impact resistance;
• water repellency and many others.

According to the recommendations of manufacturers and specialists, it is possible to lay laminate on an existing floor covering. But not every material is suitable for these purposes. So, in the list of those should include coatings that have a smooth surface, it is:

• DSP;
• concrete;
• tree;
• tile;
• linoleum.

Also, the laminate itself is also included here, but in this case a lot of nuances and requirements are taken into account, otherwise the result will be deplorable.

Note! Due to its fine structure and in case of non-compliance with the recommendations of mounting the second layer, the laminate planks can spring back, which will lead to deformation and damage to the finishing floor covering.

Preparatory work

If it was decided to put the laminate on the old laminate and at the same time get a high-quality flooring, then you should stick to a certain sequence. As in any construction (installation) process, it is necessary to begin with surface preparation. So, first of all, you should analyze the state of the existing coating. If there are significant defects, you will have to disassemble and repair everything. These are the disadvantages of coverage:

• depreciation;
• uneven surface;
• damage;
• rot;
• mold;
• uplifting or bloating;
• the absence of some elements.

Experts recommend to estimate the area with defects, and if this indicator is equal to or greater than 40%, then it is better to disassemble the old laminate and form a flat base. There are minor flaws that can be eliminated without dismantling:

• slots;
• minor defects;
• scuffs;
• cracks.

All of them, in most cases, appear due to prolonged use, so it is enough to fix them with putty. After the old coating is aligned, you can proceed to further work. First, a cushioning substrate is laid, only after these actions it is necessary to proceed to the direct installation of a new laminate flooring. At the final stage install a plinth. It is necessary to follow the installation techniques and recommendations indicated on the packaging.

Note! It is very important to strengthen and level the height differences. Otherwise, the new laminate layer will fall poorly and within a year the structure will break.

Benefits

As mentioned above, this method will save money and effort, which is very important. But, besides this, it is worth noting a number of advantages that the user will receive in the case of laying laminate on a fully prepared and smooth base:

1. Indoors reduce the amount of dust, dirt and residues of material.
2. Reducing the time for the finishing process.
3. One person will cope with the work in one or two days, depending on the area of ​​the room.
4. Costs will also be reduced by a decent amount, as a full repair includes: dismantling, cleaning, leveling and installation of the floor.
5. Additional sound and heat insulation properties. Due to the existing flooring, you can improve these indicators several times.

Note! To increase the thermal insulation of the floor between the layers, it is necessary to lay heat-reflecting material that will not let the heat go to the foundation.

Technology flaws

The technology of mounting laminate to laminate has several drawbacks that should be considered before doing work. The main disadvantage is that if there are any “sores” of the old coating, they will switch to a new one, regardless of the existing substrate layers.

If the restoration work on leveling the foundation was not fully or poorly performed, then in the near future the same defects will appear on the new laminate:

• deflections in places with voids;
• squeaks;
• deformation;
• cracks.

Note! When studying the question of whether it is rational to mount laminate to laminate, it is important to examine the pros and cons to protect yourself from additional costs.

Now you can summarize and conclude: you can lay the laminate on the laminate, but only if you have a perfectly flat and smooth surface. It should not have any defects, even minor ones, otherwise, over time, they will switch to a new floor. To obtain a new coating of laminate can be with a rigid, well-fixed and fixed base.

Video

The quality of laying laminate will depend on the durability of this flooring. We invite you to watch the video on how to properly lay the laminate on a flat base: