What can you do to fencing a construction site and what

Probably, it is no secret to anyone that construction sites are objects of increased danger. In such a territory there is a high risk of accidents, therefore such areas must, of course, be properly protected in order to prevent unauthorized persons from entering the property.

The fence around the perimeter of the construction site

There is even a clear building code for building site fencing - in most cases the fence should be solid, counted as inventory equipment and can be of three types depending on the height:

1. protective and security design - from two meters;
2. protective structures - as a rule, their height is 1.6 meters;
3. alarm fence - height is less than a meter.

An example of the simplest signal fencing

But according to the SNiP, there are many additional requirements.

Let's take a look at them, because if you need to make a fence around such an object with your own hands, then it’s somewhat unwise to begin installation without understanding the requirements.

• First, then you still have to redo everything, as there are special commissions that regularly check such things.
• And, secondly, if the fence is made according to GOST, then the probability of accidents and just unpleasant situations will be much lower. And accordingly, you will be calmer.

So, what are there SNiP on the fencing of construction sites - a brief overview of the moments.

Rules and regulations for the device fencing

It is worth highlighting the following main points:

1. It is important that the design was collapsible, if necessary, any fragment of the fence can be quickly dismantled, and then re-assembled;
2. Fences must be strong enough and stable.. After all, you see, on construction sites there is a possibility that something will fall on the fence from the side of the object, and there may be people on the other side of the fence. This means that construction site fences must withstand such mechanical attacks in order not to cause injury to passersby. For the same reasons, the surface of the fences and their edges should not contain sharp protrusions and metal "burrs";
3. Protective fence in the city outside should be equipped with a durable hinged visor and temporary sidewalk, and in most cases, railings;

Properly made fence with a visor and a pedestrian area

1. It will not be superfluous to install on the plane of such a fence and corresponding warning signs. in order for passersby to understand the risks and where they are passing;
2. Instruction, which also must be followed in cities and regions - this is the presence on the fence of the information plate, which shows the developer’s contacts, the name of the organization and the name of the object, as well as the estimated construction time.

An example of an information plate on the fence

So, we have considered the main requirements for the fencing of a construction site, and now let's look at what materials such a fence can be made of.

Types and features of materials for mounting the fence

It is worth noting that we will consider the most common options for technologies that most "fit" into the existing GOST on the fencing of the construction site.

Therefore, in your particular case there may be nuances due to which this or that material cannot be used in construction.

Pay attention to the fact that if the object is located in a city with an unusual architecture, then there may well be laws according to which the fences should be made so that they harmonize with the style of adjacent houses and buildings as harmoniously as possible. Therefore, we once again note that such things need to be known in advance, so as not to waste time, energy and money.

Let's start.

Professional sheet fences

Today it is a very popular solution.

In fact, the professional sheet is a sheet from galvanized steel with stiffening ribs. The peculiarity is that the price of the material is quite acceptable, and the quality, durability, resistance to mechanical stress and durability are high.

In addition, these fences and look pretty decent.

But the main advantage of the material, of course, is that the fence from it can be done quickly, it does not require any special equipment, and if necessary, you can easily remove individual sections, and then put them in place.

In the photo below you can clearly see how the fencing of the profiled sheet looks.

Construction of the sheet

Now consider another material.

Wooden fences

In principle, fences from boards are made easily, inexpensively, and the material itself is also cheap.

This option is also very good in that even very large structures can be made from it really quickly. It is also worth noting that if necessary, it will be easy to disassemble the wooden fence.

Plank fence

However, there are negative points.

• First, the material is afraid of fire. And at the construction site the risks of ignition of wooden structures are very high. Therefore, if you make inventory fencing of construction sites made of wood, and there are no other options, then make sure that there are no heating boilers, burning centers, etc. near the fence.
• Secondly, it is necessary to take care of the fact that the fence made of wood stood longer. After all, the rains and temperature drops will do their job, which means that the wood will constantly rot. Therefore, it is necessary to treat it with a special antiseptic, which will strengthen the tree structure and postpone the processes of decay as much as possible.

But in general, if the construction is planned to be long-term, then wooden fencing is not the best solution.

For really serious objects (for example, such as the construction of factories or factories), the next option is probably better.

Concrete Fences

The principle of the device of the fence plates

This, of course, the most capital construction.

And the load will withstand any, and spoiling such a fence is difficult, and they look good.

However, there is a moment because of which, this technology may not be suitable for you.

Everything is simple - the price of such a project will be high, because the plates will have to be installed with the help of special equipment, and by themselves they are expensive. In addition, it should be noted that for disassembly of individual sections also need a crane.

But in general, the device fencing the construction site of massive slabs - a very reliable option.

Let's sum up.

Conclusion

We have considered from what you can make fences for construction sites, as well as familiarized with the most common requirements for such structures.

We hope that the information was useful.

If you want to know more, watch the video in this article!