What are the sheets for the fence

Installation of fences has always been relevant, both for the production and for the private sector and is unlikely to lose its urgency in the near future.

But, you see, everyone wants to do the work faster and for this there are appropriate materials - for the fences these are metal, galvanized or plastic sheets that allow the quick assembly of the structure.

Fiberglass Fencing

Installation of various types of sheets

Sheets of any type are mounted on the frame

Installation of sheets of different materials occurs on the same principle - on a vertically installed frame of columns and lag (jumpers). The frame itself can also be made of different materials, such as wood, metal, concrete and brick, but this does not change the essence, since the crate remains the same.

You will receive additional information on this issue from watching the video in this article.

All sheets, except for slate, are fastened to the screws on wood or metal (depending on the frame) with a press washer. I would like to make a small clarification - despite all the variety of building materials for fences on the Internet, for some reason, the OP-6 form is being searched for the same purpose for the same purpose, but this is a document on the sale of products and has no relation to the fence.

Decking

Gofrolist for the fence at the box office

• The cold-rolled method allows you to produce such cladding material as metal sheet for the fence, for roofs or walls of hangars. In fact, it is the same material, only having a different length and a different coating. But, again, professional sheets have something in common in the coating - it is a galvanized surface.

Corrugated paintwork

• If we look at a regular painted professional sheet by layers, then on top we will see a polymer coating, then a primer, a passivating layer, zinc, and metal. Then the lower side begins, again the metal is covered with zinc, then the passivating layer, and the bottom below. But painting can be done in different ways - the first method involves hot drying when the polymer is applied with a roller, and the second is the application of a powder coating by the electrostatic method.

Zinc-coated sheet

• Galvanized sheet fences are now very popular and in South Korea have developed a new type of coating consisting of 43.4% zinc and 55% aluminum, to which 1.6% silicon has been added. Aluminum-aluminized decking is also used for roofs, and due to its reflective properties it does not heat up and does not affect the temperature rise in the building.

Metal tile fence

• From galvanized sheets for the fence can also use metal, as you see in the photo above. According to its technical parameters, such material is identical to a professional flooring for a fence, painted with roller or electrostatic method. Only the relief structure of the sheet changes, but, as you see, the fence does not lose at all.

Roofing screws

• Probably, the description of corrugated flooring would be incomplete if we did not remember the roofing screws, which are used for the installation of such sheets. All of them are produced with heads of different colors, so that you can fit under any shade of the fence and come in metal and wood. The first option provides a drill at the end of the screw, and the second - the usual tip, which easily enters the tree.

Council If the lags on the fence frame are made of a metal profile, then you should not try to screw the screws directly into it, although the instruction provides for this option - you will spend a lot of screws, time and effort. It is much easier to pre-drill a hole, 1-1.5 mm smaller than the diameter of the screw itself, and then screw it in.

Other sheets for fencing

Self-fence from larch

• Decorative wooden fences can also be constructed from sheets or panels, like the one you see in the top photo. In this case, this is an independent fence that can be used for cafes, parking lots or sports grounds. Its main advantage is more likely, not in beauty, but in speed of installation and dismantling, although one cannot refuse to give aesthetic qualities to such arrangement.

Bitumen Fence

• The bitumen sheet for the fence has a width of 0.97 m and 2 m in height, which makes it very similar to decking, although it weighs more and has 5.5 kg with a thickness of 3 mm. Such material is easily cut with a knife and a hacksaw for metal and is also easily screwed to the frame with roofing screws. In addition to the estate, flowerbeds, flower beds, lawns, or garden beds are protected with bitumen sheets, and, sometimes, without any harm to the material, they sprinkle its bottom edge with earth.

Council Bitumen is a rather viscous material, so the hacksaw will become clogged during cutting and to prevent this from happening - wet the fabric with water or machine oil. Along the fiber sheet is well cut with a knife, without a hacksaw.

Polycarbonate fence

• Polycarbonate sheets for fences can be installed with their own hands in those places where the fence can not be deaf, because it will be a "transparent" fence. Installation is made easily and very quickly, the main thing is that before this was prepared a reliable base in the form of a frame.

Conclusion

The use of any sheet materials for the site fencing saves you time, and also allows you to create a beautiful design of the fence, thanks to the peculiarities of one or another lining. Of course, the price of the products will differ, but the money should serve the needs of the person, and not vice versa.