Deprecated: preg_match(): Passing null to parameter #2 ($subject) of type string is deprecated in /web/blog-oremonte.ru/page.php on line 13
We make metal fences and fences - Blog about repair

We make metal fences and fences

05-05-2018
Fence

Openwork fence

All kinds of metal fences and fences are made of different structural materials, although they have the same purpose. For the assembly of elements, mainly steel and cast iron are used in the form of profiles, reinforcement, wire and sheet metal. The whole composition may consist of dissimilar components, as is seen in the top photo, where concrete serves as a framework.

Different types of metal fences

Forged grille in combination with wood and silicate bricks

For installation of metal fences combinations of wood, concrete, plastic, decorative stone, brick and plastic are possible. Below we look at the main types of metal fences and the general methods of their installation, in addition, in addition, you can watch the video in this article.

Forged and welded grilles

Artistic forging

  • Forged fences and metal fences sometimes represent a real work of art. Although construction itself is an architecture, however, wrought-iron fences are a special kind of sculpture.

Artistic forging подчёркивает классический стиль здания

  • Although the fence itself implies a border, a zone of prohibition or exclusion, here such terms are at least inappropriate. The construction refers to the so-called “transparent fences” and, looking at it, we see no more than a limitation in this, a skillfully made work of the master. Most often, these grids emphasize the style of the building and even the entire manor, as depicted in the top photo.

Forged gates

  • Separately, you can say about the forged elements of the fence, which are mounted not only on metal, but also on stone, brick and even wooden fences. Of course, the price for such constructional artistic creations is quite high, but besides the aesthetic parameters, which in itself is already very expensive, such a product has a very long lifespan.

Lattice of the Front Yard in the Catherine Palace

  • In world architecture there are examples of such metal compositions, the date of manufacture of which dates back centuries ago. The example shown in the photograph, together with the metal, also combines gilding, but all together is inherently inherent in the manor and the palace itself, which speaks of the high artistic value of the fence.
  • Installation of forged and welded sections are made brackets, which should be provided in advance in the supporting risers. Fixation can occur both with the help of bolts and with welding, although forged rivets were used before. At present, there is no sense in using forging for fastening, as new technologies make it possible to do it faster and no worse.

Grid fencing

Sectional fence. Rabitz

  • For the manufacture of metal fences fences also use the chain-link, which is sometimes enclosed in sections from a metal corner or fixed directly to the supports. Fences from the grid of the chain-link are relatively inexpensive, and therefore have a fairly wide application in the installation of border zones for gardens, suburban areas, as well as for industrial areas.

The grid the Chain-link fastens directly to metal columns

Council When tensioning the netting of the Chain-link directly along the posts, it will start to sag after a while, because it will simply stretch. To prevent this from happening, you can, with your own hands, stretch the wire rod along the upper cells and weld it to the metal posts.

Decking for fencing

Decking, mounted on a stone-brick frame

  • Most often, fences and metal fences are made of corrugated flooring. Sometimes it is combined with foreign materials, as shown in the photo above, and sometimes mounted on a metal frame. Such structures are characterized by a long service life and all this thanks to the technical features of the sheet itself.

Profiled sheet in section

  • Pay attention to the design features of the profiled sheet, and more precisely, to the protective layers that envelop the steel. In addition to the primer and paintwork, the instruction provides for the obligatory labeling of the film on the front part for safe transportation and storage of professional flooring.

Roofing screws for corrugated

Council Sheeting to the crossbars is fixed with metal screws, but in order to be not visible, you need to use special roofing screws. Their heads are painted in almost all the colors of the RAL table, which will make the mount invisible.

The principle of installation of metal fences

Three ways to install metal fences

  • All metal fences, with the exception of self-standing, are mounted on vertical supports fixed in the ground. Given the severity, as well as the sail structure, the supports must be strong, which is facilitated by the method of strengthening butt.
  • For this purpose, three main options are used and the most durable of them is the complete pouring of the butt in the hole with cement mortar with the addition of rubble or gravel. The second option involves bunting or falling asleep with gravel, gravel, or construction debris and then a tamper. The third method is to fill only the upper half of the well with a solution, which also imparts stability to the whole structure.

Conclusion

In our industry, the production of metal fences and fences is sufficiently developed, so their search and acquisition is not a problem. You can also find a lot of workshops engaged in welding and forging, where you can make an individual order.