Sectional fencing - high quality at a low price

Sectional metal fences

Металлические секционные ограждения в последнее время стали очень популярными у дачников, и этому есть причины. First of all, это доступно по цене. Secondly, эти легкие конструкции имеют достаточно презентабельный внешний вид.

Thirdly, installing them is so simple that the owner of a country house can do it himself, so to speak, with this.

What is a sectional dacha fencing

From the very name it follows that this section, made in the form of panels of metal or wooden materials. In this article we will consider a sectional fence made of metal, as they are stronger, hence their popularity.

Так вот панели устанавливаются в систему ограждения участка по его периметру и крепятся между собой или к опорным стойкам (чаще всего), которые расставлены по периметру и хорошо закреплены в грунте или в фундаменте. I.e, конечный результат монтажных работ – это единая красивая и надежная ограждающая конструкция.

Benefits

Some of the advantages of metal fences have already been mentioned above, but they have quite a few of these indicators.

But if you say what a good sectional fence is, then first of all it is necessary to note two indicators, which are probably the most important ones:

• Countryside security;
• Completion of landscape design.

Metal fencing

All other preferential indicators will be secondary. Of course, you can not belittle their need.

Attention! All the benefits that were listed here and which were not listed depend on several factors: the quality of the source material, the quality of production and the quality of the installation.

Kinds

Since our article makes a review of the category “sectional metal fences”, we immediately note that this category includes all types of metal materials that are somehow connected with fences and fences. Therefore, we consider everything separately.

Rabbit net fencing

Rabbit mesh panels

This is the simplest product that summer residents use today to protect their suburban areas (photo above). The advantages of such a product are many (see also the article Making a sectional fence from a chain-link mesh).

Note some of them:

• Small price (big plus).
• Easy installation.
• Ease of care and maintenance.
• If you need to make repairs, make it elementary.
• Nice appearance.
• It has rather high rates of limiting access from the outside (especially for animals).

Most often, the section of the fence of the chain-link is made in the form of a frame structure, where the role of the frame is played by a metal corner welded in the form of a square or rectangle (the form, in principle, can be any). It should be noted that the chain-link is well stretched and does not sag.

Welded mesh fencing

Welded mesh panels

This metal fence exactly resembles a rabbit, but it also has its advantages and advantages:

• First of allIt has a higher strength.
• Secondly, its size range is not limited. Here it is necessary to explain. If the chain-link for large section sizes begins to sag with time, then this does not happen with the welded fence mesh.
• Thirdly, for the manufacture of this design can be used mesh, made of various metal rods (meaning the diameter). And accordingly, both the strength characteristics and the cost characteristics will change.

Note! The cost of welded mesh fencing is higher than that of chain-link. This must be borne in mind when choosing this or that material.

Welded Products

This is the most popular and sought after view of today. If we talk about the strength characteristics, then the experts give the palm to him. In addition, it is necessary to add that the welded section of the fence has no restrictions on anything.

I.e,

• The size range is unlimited, neither in length nor in height (of course, common sense should be present).
• Patterns can be made inside any section, all at your discretion.

Welded structures

Приплюсуем сюда и такой момент - в процессе монтажа можно исправить размер. I.e, производится обычная подрезка или наращивание, если размер секции не совпал в промежуток между опорными стойками (здесь, правда, придется учитывать узор, если он не сложен, то провести эту процедуру будет на самом деле не сложно).

I would like to add that at the present time so-called 3D fences are gaining much popularity.

Forged Products

This type can be attributed to the most beautiful. Sometimes manufacturers actually offer masterpieces of art. And if wealthy people make wrought-iron fences to order, then the same manufacturers offer standard model panels that have a beautiful appearance to simple inhabitants.

Forged Products для забора

By the way, the installation of forged products is quite simple. To do this, two horizontal lags are installed between the supporting pillars (most often it is a corner), and panels are inserted between them. As practice shows, they are most often typesetting, that is, between the racks you can install several pieces.

Addition to the above

Very often sectional fences are used as temporary structures. Therefore, the service of renting fencing for construction sites made from metallic materials is very much in demand today.

In addition, I would like to add that plastic nets for fencing sports fields could be added to this category, but only in the “non-metallic products” subcategory.

Conclusion

As you can see, the demanded sectional fences made of metal can be made of different materials. But the technology of their installation is almost the same (the instruction is not so complicated, you can figure it out without problems). In the presented video in this article you will find additional information on this topic.