Portable fencing for construction sites

For many years, it has been customary to use metal portable fencing for building site fencing.

And, it should be noted, they are irreplaceable elements, since they perform very important tasks:

1. Protection against unauthorized persons entering the construction site;
2. Ensuring the safety of construction work;
3. Protection of the street highway and pedestrians from debris.

Very reliable and aesthetic

Features of portable fences

Temporary protective sectional construction consisting of squares, rods and concrete blocks

Portable metal fences are of the following types:

• Metal sectional fences;
• Fences of corrugated;
• Fences for pedestrian crossings.

Note! All products are manufactured by series and albums, according to the requirements of GOST.

So, portable fencing is of several types, so consider each of them in more detail:

1. Sectional - are made of shaped tubes, squares, rods. Such products are usually operated in the open air, and they are constantly subject to destructive environmental factors. To extend their life, the surface of the fence is covered with zinc-containing enamels and paints.

Diagram of a typical portable fence section

Tip! In order to close the view of your construction site, advertising banners can be attached to the fence.

Banners are located on the sectional fence - it is beautiful and it is not visible what is happening on the construction site.

1. Portable construction fencing of corrugated. Made from profiled sheet and shaped tube. The reliability of the metal has long made this type of fence the most popular and sought after. As for aesthetics, their attractiveness can be very high - manufacturers of professional flooring for the fence offer several interesting colors.

Solving the problem using profiled sheeting

1. Pedestrian - fences that are stationary and portable. Used to separate the flow of people in indoor and outdoor areas.

Pedestrian ограды

Production technology

The production of outdoor portable fences is a work on an exact and already over the years verified scheme, which provides for welding and paintwork, with elements of applying special anti-corrosion compounds to the surface of the product. To increase the attractiveness of the fences, decorative elements are welded to them (screwed or attached), which are made by stamping or forging.

Note! When ordering a large batch of fences for your construction, you do not have to wait long for the desired product - as a rule, the customer promptly supplies these products in any volume.

Quite often, in metal temporary fences, not metal-profile, but “chain-link” metal mesh is used as filling. Such a portable sliding fence is easy to install, long enough service life and low price, which is the determining factor in their choice.

On the photo is a portable structure with a “Rabitz” mesh

Application area

Temporary metal fence made to use:

• In the field of repair and construction work;
• At industrial sites;
• In squares and parks;
• When private housing and construction works on landscaping;
• For the protection of the site for the improvement of domestic territories;
• To separate and redirect human flows in crowded places.

With the help of portable fences, structures of any complexity can be made - durable, reliable, aesthetically appealing and with a long service life.

The advantages of portable structures

Lightweight, portable design

Compared with stationary type fences (which, as a rule, are made of the improvised material), portable structures have a number of advantages:

• The possibility of quick installation, even with their own hands (without the involvement of specialists);
• Reusable (due to galvanized coating the life of such a product is from 5 to 25 years);
• Compactness (they can be easily disassembled and transported to any other place or to a new construction site);
• Low weight (the fence can be installed even without the use of special equipment, by 1-2 workers);
• Reasonable price (low cost of portable structures makes them accessible to all);
• It is impossible to crawl through them, since they have such a step between the bars, that it is simply impossible to push a foot into it to support.

Fence calculation scheme

Fencing off the construction site sectional fence with props

This instruction will help you to correctly calculate the length of the fence needed for your construction. So, as an example, consider the calculations of the fence per 100 meters (including the gate at 6 rm.). It turns out, (100 m - 6 m) / 3 m (average length of one section) = 31 section. As for concrete blocks and clamps, their number is taken from the calculation: 31 sections + 1 = 32 (block and clamp).

To calculate a 100-meter fence with a 4-meter gate, we act according to the same formula: (100 m - 4 m) / 3 m = 32 sections and if you immediately calculate the number of blocks and clamps, you need to add 1 again to the amount received block and clamp.

In order to decorate the portable fences or make them "opaque", they can be adapted billboards and banners. To do this, you need special stabilizers, with which you can easily carry out the mount.

Conclusion

Portable fences - a modern look at construction sites. Now you do not need to build something from scrap materials, because you can use durable structures designed specifically for these needs. If you do not have extra money to buy a metal fence, there is a rental fence for construction sites. So you can significantly save the budget.

Using plastic mesh

If it is planned to build a playground, you can purchase plastic nets for fencing sports fields, which will become not only an obstacle for the “kids” during the work, but also a permanent durable fence for the entire operation of the facility. In the presented video in this article you will find additional information on this topic. Successes!