Panel fencing - classification, installation and operation
Fences have always been considered one of the main elements of construction.
For example, panel fences are designed primarily to protect against unwanted invasions of animals and people.
Photo of the fence near the administrative building
Today they are very popular among developers.
Panel fencing is used for the construction of fences in various cases:
- fencing of residential buildings and private houses;
- fencing sports facilities;
- protection of public and administrative facilities;
- in the urban economy;
- in agriculture and forestry;
- installation on other structures.
Such a fence consists of solid metal or reinforced concrete sections, support posts and fasteners.
Classification
The classification of panel fences is performed based on various factors.
So, according to their functional purpose, they are divided into:
- protective and protective, which provide protection of material values and prevent the access of unauthorized persons to dangerous areas;
- protective, prevent undesirable persons from entering protected areas;
- signal, warn of crossing the borders of protected areas.
Mesh type fencing
According to the design of the fence of this type is divided into solid and mesh.
Tip: to give the design an attractive look, you can use additional elements - railings, canopies, struts and sidewalks.
Benefits
The high popularity of fences of this type of fences due to their design features.
They differ from other species by a number of advantages:
- universality of fencing - they can be applied in different economic spheres;
- durability of panel structures;
- fences made of metal panels, do not need care throughout the time of use;
- guarantee reliable protection against unwanted penetrations;
- the simplicity and low cost of installing such a fence;
- the design is aesthetically pleasing and compatible with various objects and provides an excellent view from the windows of the office or home.
Reinforced concrete fencing
General information
Today, reinforced concrete fence may look beautiful, have a good level of reliability and functionality. The panels of the fences PO 2 are decorated with the most varied texture, the surface on both sides may differ.
The color of this fence is chosen at the discretion of the owners, but its choice must be approached with responsibility, with the support of a single style on the site.
Reinforced concrete section fence
It has long been known that b / fencing panels are an effective means for protecting a site or a house; in addition, it can be used to fence industrial objects. Previously, such a fence represented a nondescript fence of gray, uniform plates.
Today we have the opportunity to purchase reinforced concrete slabs with any appearance that can satisfy the needs of the consumer at a high level. Their price depends on the thickness and external "pattern".
Installation
The main advantage of this fence is the ease and speed of installation with minimal time and money. To do this, a glass of reinforced concrete is installed on the prepared surface, the shape of which resembles a truncated pyramid.
Poles for stoves software 2
In its upper part there is a square hole into which the supporting fence pillars of concrete are inserted, they have special grooves for mounting the main plate. After the posts are installed, it is necessary to mount the fence panel of 2.
For such an installation does not require instructions, expensive equipment and specialists, as here you can do on their own. Sections are installed on any soil without pouring the foundation, in addition, it can even be a surface with a significant horizontal slope.
Exploitation
In the event that the fence was installed without complying with the installation rules, destruction of its support part may occur. This occurs when the depth is violated during the initial installation of the pillars. Because of this, the fence may lean or fall. This usually occurs after winter.
But in general, they do not require painting, unlike wooden and other fences. In this case, we can talk about the minimum risks that relate to deformation, the manifestation of rust, shrinkage, chipping of the protective layer.
Welded Wire Section Fences
Grid fences have long since gained popularity among summer residents and owners of private houses. And also they are used in cases where there is a need to establish the boundaries of a certain area, for example, a guarded parking lot for cars.
Wire sectional fence
Benefits
As a rule, in the manufacture of a fence made of mesh, either a netting net is used, or the wire is joined by welding. It may be inferior to wrought, concrete or gabion in terms of aesthetic appeal, but its practical advantages cannot be underestimated.
Let us turn to the main advantages:
- quick installation
- low cost
- long service life
- ease of care.
Installation
The fence is wind resistant due to welded joints. Damaged items are easy to replace with new ones. Along the perimeter of the site, at a certain distance from each other, profiled columns are installed, to which the intake sections are fixed..
Installation секционного забора из проволоки
Installation производится специальными кровельными саморезами. Придать дополнительную прочность можно, установив своими руками дополнительные ребра жесткости. Один из основных плюсов секционных заборов из сварной проволоки в том, что их для их монтажа не требуются особые знания и глубокий фундамент.
Advice: if you doubt your abilities, entrust the work to professionals.
Durability and Reliability
The grid for sectional fences is made of galvanized wire, whose thickness is from three to five millimeters. The rods are firmly welded to each other, which makes the structure strong and durable. The rigidity of the wire ensures the safety of the form for a long time.
The mesh can be coated with a special enamel that protects the fence from corrosion. Manufacturers produce welded mesh of various colors and with different cell sizes.
Wire Fence Design
Such a fence can be installed on any site without spoiling the overall design. You can place an order for the manufacture of welded parts on an individual project, making the design stylish and original.
Conclusion
Panel-type fencing allows them to be installed in a short time in any territory. In the presented video in this article you will find additional information on this topic.