How to organize the production of fences
The moral condition of this system of things makes people beware of each other and, in this connection, fences grow around private and industrial facilities. And since there is a need, it means there should be a proposal, therefore, this is a real opportunity to open your business by purchasing equipment for the production of fences.
We will consider two types of construction materials that you can do on your own, and see the video in this article.

Concrete Sectional Fence
Fencing
Rabitz

The fence of the grid Rabitz (Rabitzgewebe)
- Fences from the Rabit grid are of the type of transparent fences, they are easy to install with your own hands and, moreover, their price is not very high.. Such material is often used in cottage and garden plots, production facilities and in public places.
- Structural material is made by twisting two flat spirals into one another - so intertwined row by row, and the width is set as needed. To do this, use steel wire, often galvanized, but sometimes with a polymer coating, and even more rarely - stainless steel.

Equipment for the production of fences from the grid Rabitz. ACP15 machine
- So, to start your business, you need to purchase equipment, and in this case we will consider the production of the grid on the ACP15 machine. This model has been produced since 2005, the device is easily reconfigured and automatically bends the ends of the wire at the edge. Due to this, one operator can cope with the work, simultaneously servicing 3-4 machines.
- The parameters of the fabricated grid, that is, its length and width, are set on the automatic control unit. Such automatic machines are able to produce products with a wide range of cells, they can be from 20 to 60 mm, which is quite enough for fences of various types. The section used for wire weaving varies from 1 to 3 mm and is directly dependent on the size of the cell.

The grid the Chain-link which is packaged in rolls
- Automatic ACP15 allows the production of mesh for the fence of uncoated wire, as well as galvanized or coated with polymers. You can set the width of the canvas on the control panel, which can be from 60 cm to 2 meters - agree that such dimensions can satisfy almost any requests.

Semiautomatic for the production of mesh chain-link
- Of course, you can set up production of the Rabitz grid, spending less money on it, that is, purchase a semiautomatic device, because the buyer doesn’t care what machine was used to make a fence from the manufacturer, but it’s not all the same to the manufacturer.
- The fact is that each semi-automatic machine should be serviced by one operator, whose function is cutting and bending the wire, its direction and so on. Labor productivity in such situations is much lower and requires maintenance staff.
Council For the fastest possible development of production, you can frame the net with a metal corner yourself, making sections for fences out of it, as well as set up production of posts from a metal profile.
Concrete sections

Concrete fencing
- In modern times, the production of a concrete fence is no longer always associated with a smooth or ribbed stone wall, because special forms with imitation of decorative stone and brick, as well as colored cement, are used for this.

Double Sided Polyurethane Forms
- To establish a business for the production of concrete fences, you first need to purchase molds for casting sections and pillars. Basically, these matrices are made of fiberglass, PVC and polyurethane, but for the boxes used sheet steel, metal corner and boards.

Polyvinyl Chloride Form
- Forms can be single and double - everything will depend on which section you need, but for the manufacture of fences for decorative building materials (brick, stone), double-sided matrixes are used.

Vibrating table molding
- Of course, you definitely need a molding vibrating table for the production of fences, without which the production of concrete products is impossible. In addition to it, you need racks for drying finished slabs and the greater the capacity on the vibrating table, the more racks you need for one work shift.

Production and reinforcement of the section on the vibrating table
- Pay attention to the photo above - there you will see the process of manufacturing the intake section in metal-plastic form on the vibrating table. In just one shift, that is, in about 8 hours of working time, you can make about 20 panels of this or larger size. Now, knowing the parameters of the sections being made, you can calculate the required area of racks for drying finished plates, but for all this you will also need a heated room under the roof.

Form for casting concrete columns
- But this is not just about casting panels or sections - we are talking about the production of concrete fences, and this means that for each cast section you will need approximately one concrete support. Considering that concrete pillars are made on the same principle as panels, you will have to acquire and place similar equipment for them.
- For casting concrete pillars for the fence will need not only the matrix, but the vibrating table with the required number of racks and a place for their placement. In addition, you have to think about the staff, because one person will not be able to cope here even with small production volumes. The reason for this is the most banal - concrete is heavy and it is simply impossible to roll the forms alone.
Council In order to organize the business of manufacturing fences, you should first of all analyze the possibilities of the market for finished products or, in simple words, find out what they buy better and which fences are more valuable in your area. Also important is the raw material itself, because the equipment you bring once, and the raw materials will have to be delivered all the time, so for the organization of business for you no less important is the raw materials market.
Conclusion
The organization of any business is associated with certain risks, even if it is not capital-intensive, but a time-consuming investment, because the market always has a fraction of unpredictability. However, the purchase of high-quality equipment will not be unprofitable, because such mechanisms can always be sold, especially if their use took into account instructions from the manufacturer.
But in any case, even in spite of the global crisis, fences will always be in demand, although you may have to switch to the issue of cheaper options.