How to make a wooden fence with your own hands

Classic is always in high esteem.
Wood is always warm, natural and stylish. Therefore, this material is so valued, it is the most versatile and widely used. For the manufacture of the house, beams and planks are used, the housing is heated in the winter time, again it is made by firewood and branches, waste from woodworking. Furniture, dishes, decorations, decorative elements - to make all this, wood can be used. And fences, by the way, the same can be built from wood, and from any part of it. Do not believe, see for yourself.
The tree has no unnecessary parts.

Weaving is simple and beautiful.
And this is absolutely true, for any part of the adult tree can be used. For the design and manufacture of the fence may be suitable:
- Branches and vine - for the manufacture of various fences. Weaving a fence from the vine - an occupation that is relevant at all times.
- Trunk - the sawn timber obtained from it gives such wide opportunities that our instruction devotes a separate large chapter to them;
- Roots. Oddly enough, but even these intricately curved wooden underground formations can be used to make various decorative fences.
Note! At first glance, the useless bark of the tree can also be used for fencing various ornamental beds, short shrubs. And although it does not have such a service life as wood, it is also possible for it to find an interesting use after use for fencing. From the bark comes a very interesting decorative mulch, which is lined with the ground under the trees, preventing the soil from drying out on hot summer days.

Who said that the roots - it is garbage, not true - building material.
Weaving - fashion always

For dissociation from neighbors, such a fence is also quite suitable.
If you have enough hazel, willow rods, or any other flexible material in the vicinity of a country house or a private house, then the branches will be the best option for solving the problem of building a wicker fence. . How to make a fence from the branches of trees, we explain the method of weaving.
In this case, you need to take into account some of our recommendations and you will succeed:
- The material that you will use (branches, vine) is collected in early spring and late autumn, when the “product” itself is fully visible. Long relatively straight branches with a diameter of 2-3 cm are selected, which are then sanded and dried;
- Fences erected from this part of the tree are not heavy and do not require permanently installed pillars, processed according to the rules of rotting, and packed into the ground for a third of its length. As supports can be used trunks or branches with a diameter of up to 10 cm, sharpened under the stake and driven into the ground.
- The step of installing stakes can be any even 50 cm, at least 1 m. The calculation criterion is as follows: each detail (branch, vine) must go for at least three pillars, but generally the larger the better;
- To prevent rapid decay of the lower layer of the braid under the fence, a drainage groove is being prepared, which is made 50 pounds down on the spade bayonet width. The ditch is filled with rubble and sand to better drain moisture;
- Laying direct parts of the fence is carried out around the perimeter, with the extreme branches can be knocked in with nails to the support. The branches are rammed tightly enough, for which you may need a hammer or a mallet (the hammer is more traumatic for the vine, therefore it is better to take a mallet).
Interesting to know! Weaving is not necessarily horizontal, it can be vertical, with the rods inserted between the connecting strips. But in general - there are no barriers to fantasy.
What will give us a tree trunk

A wicker can be from a board, a photo to a subject.
Paraphrasing the words of the great actor of the national cinema Pugovkin, from the film “It Can't Be”, you can see that the trunk will give us everything. From it we get beams on supports, from it we get cut and uncut boards, even a slab can in some cases be used to make fences.
So, we can make:
- Fence fence. An interesting solution when the trunks of young trees with a diameter of 10-15 cm are used to create a stationary and fairly reliable fence. A prerequisite for the creation of such a fence is wood processing: first from the bark, then from rotting, as part of it will be packed in the ground.
Nowadays, combined techniques are also used when prefabricated stake structures are laid on the stone foundation and are fixed on specially left corners or metal strips. But this is a modification and there are no fundamental differences. There is a technique.
- The use of boards in the manufacture of fences.
There are more options here. Fences are allowed:
- Классические. Используются сборные пролеты, которые накладываются на деревянные столбы и фиксируются саморезами или гвоздями. В них шкатетины забора идут вертикально, при этом верхний край может иметь любую форму;
- The edged boards which are horizontally filled to support. This design has the name - ranch type fence;
- Fences from not cut board with vertical or horizontal installation of boards. Can be used as temporary for enclosing construction sites and other industrial facilities, and as permanent, including for enclosing private sites;
- Various weaving of the board. And vertical, and horizontal, and herringbone, and striped. In short, as you like, and install. You can make as shields, you can weave already in place.
About installation and not only

You can install the finished spans, you can mount in place.
Installation of wooden fences - the process is simple and fast enough. Here are helpers, of course, would be preferable to installing alone. Any instruction will tell you that the installation of a wooden fence begins with the installation of supports.
The whole process is as follows:
- Foundation. It may not be displayed if you prepare wooden pillars for the fence, or you fill the pillars of the supports with the nesting method;
- Installation of the pillars themselves. Here it is desirable to observe the principle of one third to the ground;
- Mounting guide rails and fixing directly шкатетин fence;
- Processing and coloring.
Note! There are other ways to solve the problems of how to make a wooden fence, or how to make a fence of wood with your own hands. You can use any technique, combinations and uses of other materials are possible, anything is possible, only the price of such a realization of fantasies can be very high.

Combinations are possible.
Finally
A little imagination, a little soul, and you will have a wonderful wooden fence that will stand for 10 - 15 years exactly with the right and timely care. The video story can also tell you something, look (also read the article “Fence from unedged boards - interesting solutions from substandard forest”).