How to fix the profile on the fence

15-02-2018

Fence

The construction of the fence can hardly be trusted to inexperienced professionals who are poorly versed in building materials. However, even a person not familiar with the intricacies of construction knows that it is best to build a fence of durable and reliable material - sheeting. And it is not scary if the workflow is unfamiliar, for this we invite you to read our article.

The fence of corrugated can be considered eternal, except that the appearance will change with time

Advantages of a professional flooring

First of all, it is necessary to figure out what the advantage of this material is:

The most important thing is durability. A thin high-quality metal alloy is wear-resistant and endowed with enhanced protection from external influences. The surface is not afraid of either moisture or acid-base precipitation, or temperature changes.
Strength and lightness which allows you to do all the construction work yourself. You do not need special equipment and tools, everything can be done with a single screwdriver.
Dozens of different color and texture solutions will allow everyone to find something of their own. What decking is better for a fence? Read about it in other articles on our site.

Versions of a professional flooring: the cost depends on both color and texture

And, of course, it is worth mentioning about the cost of this material. The price of the corrugated fence is very different (in a positive direction) from the brickwork and wooden slats.

Fence installation

Use of various materials as a basis

How to build a fence of corrugated their own hands? Read about it below.

For the fence, it is important not only what material is used for finishing, but also what the pillars (base) and frame are made of.

The easiest way to make a frame of wooden bars, this will require only metal corners and screws. However, this method can not be called reliable, for example, it is suitable as a temporary fence of a building site.
The most reliable are metal pillars, pipes, which are dug into the ground and cemented. They are not afraid of rain and wind, time does not affect the metal. The only point is the aesthetic side of the issue, but using paint, the pillars are easy to give an attractive appearance.

The foundation makes it possible to reinforce the pillars only if the length of the part in the cement is at least 50 cm.

Brick pillars - in this case, the fastening of the profiled sheet to the fence is carried out not to the brick, but to metal bridges. This method combines reliability and beauty, although it is considered the most expensive and labor-intensive, especially for inexperienced builders.
First of all, you need to take care of a reliable basis. Pit depth of 30-40 cm is not suitable for structures with a height of about 2 meters. Here you need to dig a recess of 1-1.5 meters, of which 15-20 cm will be occupied by a carefully rammed cushion of sand and rubble.

Features of the erection of pillars

Metal pipes are driven into the ground with a sledgehammer

If you want to give the fence reliability, be sure to use a strip foundation, which will allow you to pull together all the vertical racks. It is not necessary to lay a massive foundation, enough trench depth of 40 cm and a width of not more than 25 cm.
Do you use wooden racks? Remember, before you attach the decking to the fence, they must be treated with antiseptic substances. This will increase the operational life of the tree. It does not hurt to varnish, then they will not be afraid of mold.
Metal joints are best fastened by welding. This method is considered the most reliable, and if desired, it is extremely difficult to break.
For the manufacture of cement for the installation of pillars, use a plasticizer (liquid soap). It will improve the adherence of the solution and shorten the curing time by several days.
To make the solution stronger, it needs to be watered with water for 15-20 days, every 2 days. If it rains at this time, then consider yourself lucky - nature will do all the work for you.

Important! Before you attach the fence of corrugated board, you should weigh the pros and cons. Still, for inexperienced people, the process of building a fence may seem very difficult, doubts and uncertainty will adversely affect the course of the result. Therefore, it may be better to contact the specialists, if, of course, there is extra money.

Still, let's get back to how to fix the professional sheet on the fence.

Installation process

Well, now let's go directly to how the sheeting is fixed to the fence.

First of all, it is necessary to prepare the material. If necessary, cut it to the desired size. For this use scissors for metal.
After that, supports should be installed on the ground, equal to the required height. The minimum size is 5 cm.
Install the corrugated sheet on the supports and press it to the fence frame.
Attach the hex bit to the screwdriver.
Screw galvanized metal screws with rubberized washer on the corners of the sheet.

The distance between fastenings is no more than 30 cm, this will allow to be protected from strong wind

Check the horizontal plane.
Scroll through the screws the entire sheet of corrugated so that it does not hang out.

Self-tapping screws differ among themselves in thickness, color and length

Self-tapping screws can be replaced with bolts with nuts, in this case the installation process of the fence will be as follows:

After the supports for corrugated flooring have been installed, attach the sheet to the crate.
Drill in the places where there will be fasteners, holes equal to the bolt diameter.
Thread a bolt with a washer near the cap into each hole.
On the other hand, tighten the nut before putting the washer on. This process is shown in the photo below.

Tighten the nut until it stops; if the lintels are wooden, then it is desirable that the washer sink into the material a little

Note! Washers are needed to avoid loosening fasteners.

Features fasteners

Screws are screwed into the deep part of the corrugated board, but there is an exception - when you need to join two sheets. In this case, the fastener fixes the part where the joint occurs.
Screw the hardware must be strictly at an angle of 90 degrees relative to the corrugated board. In case of an uneven fixation, the fasteners may loosen and become loose.
Another important point - if you feel that the screw is scrolling (often happens when mounted on wooden bars), drive into the hole of the wood chips. This will create a new support for fasteners.

In any case, it does not matter what to fix the professional sheet on the fence, the main thing is that this should be done reliably and competently. Then such a fence will last more than one year.

Conclusion

The very last stage is cleaning and cleaning the area from debris. There will not be a lot of waste, but in any case it is advisable to remove even the frozen cement from the ground; nevertheless, it can prevent the grass from climbing.

We hope that the above instructions: how to fix the decking on the fence will help you save on the services of construction teams and carry out all the work yourself. The video is attached to the article: how to attach a professional flooring to the fence, where, if necessary, you will find answers to all the questions that have appeared.