Fencing racks: fixed and portable structures
Mobile or stationary - these types of fencing find their application in the arrangement of various sites, zones, territories. For example, the bf 007 fence stand is perfectly suited for fastening various types of handrails, from plastic (PVC) panels to eco-friendly and noble wooden handrails.

Example of portable metal racks

Rails mounted on the basis of racks bf 007
Made of stainless steel, with a figured texture and the possibility of tinting, this part allows you to achieve the perfect decoration of the railing and at the same time save a lot. (See also the article Types of fences: features.)
What are racks made of
When choosing a material, it should be based on the purpose and conditions of operation, which will be subject to protective racks.
Of course, this type of support also has constructive requirements, including:
- Bending strength and mechanical load. This is especially true of supporting fastenings for metal and wooden railings;
- Resistance to corrosion, temperature extremes, direct sunlight and moisture.
Tip: when choosing metal for racks, give preference to stainless steel, which goes well with any type of coating, including under bronze ("old"), gold, etc.
- Registration: availability of fittings, carving, pattern and other decorative elements;
- Support heightwhich will determine the immediate dimensions of your fences;
- Cost of: racks for fences in any case should not become too expensive article in the decoration of the room or territory.

Polished brass stand with removable ropes
As a rule, manufacturers offer prefabricated racks, which are either permanently installed on the ground, having a base-foundation of a rounded or rectangular type, or mounted on fasteners or concrete bases.
The most common method of manufacture is rolled stainless steel, tree curing, marble polishing, etc. In the height of the rack can reach 850, 950, 1000 mm and further on the articles. Release also supports with adjustable height and precast type.
When choosing racks for a certain type of handrail, for example, stair railing, it is necessary to consider the material from which the stairs are made, as well as the step and height of the steps. As a rule, fencing should not be lower than half the average human height, and this is 85 cm. The initial stages of preparing stainless steel stair racks can be found in the video in this article.
Mobile racks
Appointment of mobile racks
Portable fences do not have a stable base and can be installed in any places to designate the territory or borders of a particular zone of control.
Such racks were widely used in the design of municipal points:
- Railway stations, parking lots, airports and other places to control the transit flow of passengers;
- Conducting events awarding prizes, exhibitions, fairs, receptions, etc .;
- At passage plants, factories, enterprises;
- On the territory of administrative and management institutions, etc.

The construction of fences
One of the most common types of restraints are tape fences: they are used in all the places listed above and are metal pillars in which a wide tape like a tape measure is mounted. In the course of installation, it is stretched to the required length, with the possibility of fixation. At least 50 cm, at least 2m50 cm - the organizer has the right to choose the distance between the bars at his discretion.
Advantages and differences of mobile racks
Among the most significant features are the modularity of the design itself, which allows the owners of the territory or the organizers of the event to assemble fences with their own hands. Or install a ready-made system, renting it and paying the minimum cost for installation. This also solves the problem of transportation, since the fences of any perimeter can be compactly placed in the back of one truck.

Mobile support with a sliding tape
Easy installation is also supported by the possibility of orientation in place: you can operate not only with the height of the uprights, but also the distance between them. At the same time, the weight of one support determines the stability of the whole structure: if the metal is heavy, you can save on the connecting ropes and vice versa. The accompanying installation manual allows you to implement any type of fencing configuration, distinguish zones by color - for example, install red ropes in one, blue in another, and so on.
What else distinguishes mobile fencing systems is reliability and durability. Having once ordered and manufactured mobile turnstiles and racks, you can not only use them for personal purposes, but also rent them out. Easy disassembly, transportation and repair (replacement of parts) save costs in such a business.
If there is a need to highlight your event, make it stylish and organized - then professional stands are suitable for these purposes in all respects. Adequate and reasonable price, will allow you to recoup the costs in just a couple of operating periods. (See also the article Plastic fencing: features.)
Stationary racks
In places in which the flow of people reaches the maximum level, it is impossible to do without installing fences. In this case, compact, do not interfere with traffic and do not require serious investments, for example, chrome racks will seem the best way out. However, in this case, mobile fences will be useless, as the crowd will simply demolish them, and the mechanical load will also shift from the reference point.

Option of fencing with fixed supports
Tip: when choosing stationary racks for places with a large flow of people, give preference to low and round, without sharp traumatic faces and tips.
In any case, the manufacturer should require a certificate of product that confirms their compliance with GOST and operating conditions. Installation of racks is also best trusted by professionals: you will be advised of the frequency of placement, the height of racks, and the type of fence - with a rope or more durable connecting materials, such as a metal grill. In addition, experts will help you choose fittings and consumables.
Conclusion
In this article we met with the main types of support-fencing, which are intended for zoning. Mobility and compactness of these racks, given the affordable prices and versatility, determines their popularity in the market.