How to sheathe a house blockhouse

Making your own home, any person makes every effort to the facade of his house looked good, beautiful and original. Therefore, when carrying out repairs, he assigns primary importance to the choice of materials. The modern market of building products has a huge catalog of various attributes, accessories that help in carrying out high-quality cladding of any building. Among the wide variety of materials, blockhouse is of particular importance. How to sheathe a house with a blockhouse can be found in this article.

According to its external data, the blockhouse is similar to a conventional board or clapboard. On its side parts there are grooves and ridges. This material is lightweight, but it retains its natural strength. Houses, decorated with it, look like the buildings of timber or cylindrical logs. Externally, these buildings resemble a log house. The front surface of the panel has a semicircular shape, which gives it a resemblance to a log.

Pros and cons of the blockhouse

Any building material has advantages and disadvantages, it can be said about the blockhouse. The main positive aspects of its use are the following:

• strength of the foundation, due to which a high degree of resistance to intense external influences is guaranteed;
• as a result of minor damage, it is enough to restore the base. Positive results can be achieved by grinding the surface and then painting it;
• the appearance of this material is highly aesthetic and perfectly performs decorative functions;
• insignificant weight of the structure creates a slight load on the foundation;
• the installation process of these panels is lightweight and high speed;
• is the material that provides additional warming of the base of the house;
• Like any natural material, the blockhouse is endowed with the ability to "breathe."

Note! A significant disadvantage of such a material will be its low degree of wear resistance. After all, it is made of natural wood, which requires periodic dyeing, varnishing and other compositions. Such activities lead to significant material costs and hassle.

Features of the choice of material

Now a little about how to sheathe a house with a blockhouse. Let's start from afar. This is the choice of the relevant material. As it may seem at first glance, this should not cause any special difficulties. In fact, it is not easy to give preference to one or another type of material, because a blockhouse differs in both external indicators and quality characteristics.

Special attention should be paid to the width of the board. The exterior of the house is carried out with the help of rails of considerable size, they must be equal. Their permissible width ranges up to 195 mm.

It is important to determine the choice of the type of wood. Most often choose a blockhouse made of pine, spruce, larch. They are the least exposed to the processes of decay. You should also learn about the place of growth of the source material.

Note! It is known that the northern rocks are very strong, and this is best reflected in the indicators of the blockhouse. Such facts can be learned by examining the annual rings of wood. In the considered rocks the distance between the annual rings will be minimal. Naturally, for cladding of buildings they use not only wood from the north, but they give preference to the north.

The peculiarity of installation work

Decorating the house with a blockhouse with your own hands will help not only save money, but also allow you to get the foundation, designed according to the personal idea of ​​each master. Of course, any work related to construction must begin with preparation. As soon as the blockhouse is brought from the store, it is necessary to remove the protective film from it and put it on for several days to dry. Thus, the material will be able to adapt to new external conditions and its natural adaptation will occur. Sometimes they resort to the treatment of this material with antiseptic solutions.

The design of the external walls of any structure is not only an aesthetic function. This material is able to warm the building, making it comfortable to live.

The order of the covering of the building

Installation should begin with the construction of the batten. Difficulties with its manufacture usually does not arise, and such work under the force of even a beginner. To do this, take a bar of wood with dimensions of 30? 40 mm. Such bars are fixed at the base of the wall in a perpendicular position relative to the blockhouse. And the selected material most often has a horizontal position. Accordingly, the crate will be installed vertically. This construction is fastened to the wall with wood screws. To crate located strictly vertically, you need to check its construction level.

The installation work associated with the fastening of the material on the concrete is associated with the advance drilling of holes in the wall and the use of dowels. Here you can use a more convenient way. To do this, screws are screwed into the bar, then it is applied to the wall, center points are marked and holes are drilled after the perforator. After that, the bar is fixed with dowels. To provide a wooden plank with a strong base, it should make the holes smaller in size than the diameter of the screw. The screw length must be 75 mm or more. The wooden parts of the crates should be located at a distance of 50 cm from each other. Also for installation it is convenient to use special fasteners - clamps.

When conducting the exterior decoration of the walls of a house with a blockhouse, it is important to install a heat insulation layer. Interior decoration of such works does not provide. Traditional installation of thermal insulation is associated with wall covering with a special film, which is installed before fixing the batten. It will provide the base with high-quality waterproofing. As such material you can use roofing material, polyethylene or a coating specially designed for such purposes. It is possible to fix a waterproofing layer with a construction stapler.

On top of this base is crate. The dimensions of the slats should correspond to 40? 50 mm. Such dimensions are due to the thickness of the insulating layer, equal to 50 mm. The seams should be as tight as possible. Existing gaps and slots can be treated with foam. After that, between the crate stacked slabs of mineral wool or foam. A layer of foil is laid on top. It is also secured with a stapler. The joints of the layers are glued together with aluminum-based tape. And at the end of these works we sheathe the house with a blockhouse.

The proposed video will help to understand the features of the wooden slats and help to clarify the features of the veneer. The above installation scheme will be especially interesting to beginners and people who carry out such finishing work for the first time.

Protection and care for cladding

Full decoration of the external walls of the house with wooden planks does not mean the end of all the work. In order for the finished coverage to last for a significant period, certain actions need to be taken. Make a choice among all kinds of varnishes, paints, paints, mastic, antiseptics.

To begin with, it is necessary to primer the base, then apply varnish or paint without color to the surface. As soon as the painted outer casing is dry, it is necessary to grind it. Then the surface can be covered with a new layer of enamel. Preferring certain materials, it is necessary to acquire the highest quality samples. The life of a blockhouse will depend on this. Moreover, the restoration will have to be done regularly approximately every 5 years. For this purpose, a similar paint or varnish is chosen as a coating. Otherwise, the previous layer will need to be removed.

The finishing of the blockhouse contributes to a noticeable weatherization of the house and its reliable protection from adverse atmospheric influences. The buildings, decorated with a blockhouse, look luxurious, unusual and interesting.