What are the best veneered doors or pvc: the right choice
What doors are better than PVC or veneered, this question is quite understandable, it is always asked to itself when choosing from two materials. Today we will understand which doors are better than veneered or PVC.
The video in this article will show the details of the design itself and will talk about the materials that are used in the manufacture. Also will be offered instructions and recommendations for choice. Since both designs have their positive and negative sides.
Door selection
Doors PVC film and veneered what it is necessary to understand immediately and only then draw conclusions. Look at the photo and select the desired design (see Design of doors in the apartment is determined by all the rules). Price will also matter. After all, quality products can not be cheap.
Both designs are similar in one, this is the ability to install by hand. In all other characteristics there are significant differences. To determine the doors of PVC film or veneered, let's immediately consider what each of the mozheli represents.
Doors made of natural veneer
There are two types of veneer doors (see. Which are better - laminated or veneered doors: we do the analysis): natural, which are completely made of natural materials, and artificial, the frame of which is made of plastic. Veneered doors made of artificial materials outwardly do not differ from doors made of natural materials, however, the service life of such doors is much less.

Virtues |
|
disadvantages |
|

While observing the rules of operation, you can extend the service life of interior doors made of natural veneer. After all, these doors are quite reliable, since the surface made of solid wood is covered with a special compound to increase resistance to mechanical damage.
In addition, veneered interior doors are much lighter than doors made of solid wood, which makes them more convenient to use and also facilitates their transportation.
Consider factors when choosing
When choosing interior doors, you should consider several factors, such as:
- The type of doors and their colors (see How to choose the color of the doors according to the interior) Must be combined with the overall style and color design of the room. Fit into the interior beautifully and be in the room in which they are installed, which is called "to the place";
- It is necessary to consider the life of the doorso that you do not have to repair the doors often enough or immediately after installation. In order to extend the service life of the doors, while retaining their visual appeal, it is necessary to take into account the functional features of the room in which veneered doors will be installed.
In addition, be sure to take into account a very important factor - the cost of interior doors. The cost depends mainly on the material from which the door is made.
Sufficiently expensive doors are doors made of valuable hardwood such as oak, maple, mahogany and beech. These doors are characterized by the highest quality - they are durable, environmentally friendly and not prone to deformation.
The nobility of colors and the beauty of natural wood will be able to please the aesthetic sense of buyers.
Pros and cons of doors made of PVC
Quite recently, strong and beautiful PVC doors appeared on the market, having managed to win the recognition of customers in the shortest possible time. And this is not surprising, because such doors are characterized by several advantages.
To make sure of this is quite easy - you just need to order any of the doors made of polyvinyl chloride in the online store “There is no cozy home”.
Virtues дверей ПВХ
Virtues и недостатки таких дверей, чаще всего, одинаковы и не зависят от условий и особенностей эксплуатации дверей ПВХ:

- The main advantage of any PVC door is its attractive appearance and low weight, which is possible due to the special method of their manufacture: wood boards are glued to a special frame and covered with PVC film. This manufacturing method provides ease of installation, high wear resistance and durability of doors. Therefore, after a long time of active use, the structures retain impeccable “appearance” and quality.
- Reliability in operation - the design of the door and its accessories remain for a long time, in the event of a breakdown, any part is easily replaced;
- Environmentally friendly - door designs meet all standards of environmental safety, and therefore can even be used in rooms for children or people who suffer from allergies;
- Ease of maintenance - high quality PVC doors do not attract dust to themselves, and are also not exposed to various household chemicals, and therefore, in a relatively short period of time, the structure can be cleaned of dirt;
- High level of noise and heat insulation - these doors do not let in noise from the street, are sufficiently resistant to temperature changes, and therefore are often used as a means of creating an optimal indoor climate;
- Resistance to moisture changes - the doors do not crack, and at high humidity and when exposed to precipitation retain their appearance;
- Resistance to mechanical stress - it is very difficult to leave a scratch or a dent on the PVC doors, but if this happens, the PVC film can easily hide most of the defects.
Attention: It is thanks to these advantages that PVC doors are used not only as interior doors, but also as balcony, vestibule and office structures. In some cases, these doors can be used as entrance doors.
disadvantages дверей ПВХ
All designs, even the most advanced, have certain disadvantages, and PVC doors are no exception. Although, if desired, all the disadvantages can be easily turned into pluses, besides, the disadvantages of PVC doors themselves are not so noticeable.
So:
- One of the design flaws is their versatility - such doors are widely used, which somewhat scares away those buyers who seek to create a luxurious interior.
- Polyvinyl chloride is not natural wood, and therefore for a number of characteristics it will lose to natural wood species. But even such a drawback can be easily compensated - the cost of PVC doors is an order of magnitude lower than wooden structures, and, therefore, this can be saved by purchasing building materials. To purchase such a design, as a rule, can afford almost everyone!
- Another disadvantage of PVC doors is considered by many to be their “office” look - because of the low cost, such doors are often used in offices, and therefore many refuse to buy PVC doors for the home, saying that such designs will look too “formal”. Although, to solve this problem, you should first of all choose the right online store with a good range of products, for example, “There is no cozier house”. In this store you can easily find the door, not only for the office, but also for any room of any home!
The doors of pvc film and veneered that you already have an idea and understand what is necessary for your room.
Now let's look at what else you should pay attention to before making a purchase. After all, the material is important, but there are also other details that deserve attention.
Door selection rules
Experts recommend to resort to some rules when choosing:
Dimensions | If the width of the door opening is from 80 to 90 cm, then a standard single door will fit. A sliding or hinged double door is made for openings that are 110 cm wide. If the owner does not want to reduce the door opening to a more standard size, then it is also possible to pick up a door of the required size |
Budget definition | It is necessary, first of all, to determine the amount that can be spent on the purchase of interior doors. If possible, you should purchase all the doors at once, and not one by one. And then there will be no risk of getting into a situation in which the required model of the door is either discontinued or is not in stock of the required shade. It is not a good idea to buy doors from different manufacturers, since designs can vary greatly, and such doors in one apartment can look at least ridiculous. That is why you should calculate the budget in advance and determine what you can afford. |
"Full set" | When purchasing interior doors, it should be remembered that the door is not only the door leaf, but also the box, the threshold, the door panels and the trim. Therefore, when comparing prices, one should specify which price is indicated: only for the door leaf (most often it happens) or for the complete set (it happens extremely rarely). The total cost will help calculate the costs faster (sometimes the price only for the canvas will need to be multiplied by two). |
Quality certificates | When purchasing doors, you should check all kinds of product passports, as well as quality certificates. Pay attention to all points that interest, and ask the necessary questions. PVC door manufacturers do not undergo mandatory certification. Reputable companies, which take into account the interests of their customers, are increasingly paying for voluntary certification, which proves the high quality of their products. |
Doors PVC film or shponirovany you now pick up without any problems. Their price is also quite different. The most important thing is that they are reliable and of high quality. Then the question of the door you have disappeared for a long time.