Pendular aluminum doors: installation features
Doors swing aluminum not so long ago appeared on the market of sales. But already found their fans.
This is a fairly compact design that can decorate many rooms. But not everywhere pendular aluminum doors can be installed.
There are some parameters you need to know. Today we will talk about how to install aluminum swing doors and what is needed for this.
Virtues и недостатки
Before making a purchase, it is necessary to determine the pros and cons of these doors, as well as consider the material on its quality characteristics.
Virtues |
|
disadvantages |
|
Swing door installation
According to the instructions, the installation of doors is done in stages. He correctly perform each stage, in the future depends on the correct operation of the doors. On the video in this article you can see everything clearly.
Attention: It will be necessary to make a qualitative markup here. Because of any deviation, the system will not work.
The order of work
All work is done in a certain order. This is the key to the quality of the system and its longevity:
- First, markup is made at the bottom of the opening. Then we transfer it to the upper part. It is important to maintain accuracy when working, do not forget to use a plumb.
- We make the profile fastening lines. All actions must be checked with a measurer. In the installation process at each stage should use the construction level. If you fix something by making a mistake, then the door will not function correctly;
- Next, fasten the profile on our markup. What used dowels. Holes are prepared using a perforator. If the work is carried out in a wooden house, then we make the connection with a screw;
- Do not use dowels from the sets for fastening, they will not give the required stiffness and quickly become loose. Buy individually plastic screws to it for a couple of mm more from the cross section of the hole, then this connection will give the desired rigidity;
Attention; To improve sound insulation, a rubber gasket should be placed under the tires. Prepare and measure it in advance.
- Then mount the connector. We fasten on one side, for the connection we also use dowels;
- Next, we are engaged in screwing the second part of the square. This is done with a screw, which, as a rule, comes in a complete set with a door. Making the mount, but not too tight. It is necessary to firmly fix only after the correct installation in geometry;
- Install the glass connectors. First, we start at the bottom, and after - at the top. With the help of supports do the right adjustment. It is also recommended to use gaskets. The glass must be pressed with a screw, and for this it is necessary to install a gasket that will not allow damage to the canvas itself;
- Now the door is almost installed. Do not forget to check it with a plumb. When we make sure that everything is in order, we firmly clamp the fastening screws.
In a similar way, many other types of doors are installed: bar, interior (see. Installing interior doors with their own hands without any complications), pendulum. There is no great difficulty in this, the main experience and some effort.
Before starting the installation, it is nice to see a photo that will help you fully understand the process of performing the necessary work, there is an instruction and you can safely begin the installation itself. Doors pendulum aluminum will serve you for a long time.