How to warm the front door to the house was comfortable and

How to make the house comfortable for you and your loved ones? How to eliminate all the flaws? How to change windows? how to warm the front door? Such questions arise from many people who are worried about their homes.

Before you answer them, you need to decide on priorities for you. If you need to increase the thermal insulation of your house, first of all you should pay attention to the walls, doors, windows.

Wooden and iron doors

Warming of entrance doors is a responsible matter. And it is necessary to clarify with what material we will deal.

Entrance doors can be:

• plastic
• metal
• wooden (see. Entrance wooden door with his own hands: under the force of any).

Self-insulation of plastic door units is a difficult job and requires special knowledge and tools. And to insulate a wooden or iron door (see How to insulate an iron front door) is a man who wants to do this work on his own.

The tree is quite "malleable" material, it lends itself well to processing. On the other hand, it is from wooden doors that blows much more often. When the temperature drops, the wooden structure shrinks in size, even in a fitted door block.

So, the gap can be several millimeters, but the gap will still form. The more frost on the street, the greater the gap, and the stronger will blow. How to insulate the entrance door made of wood, we consider below. But before that, let's look at the iron doors, how they are influenced.

In them, resizing is provided for by the design of the doors itself - a gasket has already been laid between the leaf and the box. There are also metal doors that do not have any insulation at all. They only have air inside.

Рассмотрим подробнее, how best to warm the front door.

Warming of metal doors

Insulation of the entrance doors, if there is a metal side in them (see How to insulate the entrance metal door) and fastened to the screws, is not difficult.

So:

• Remove the removable sheet
• In the door leaf put foam or other insulation. For convenience, it can be applied in several places.

When performing such works, it is necessary to take into account that the foam does not interact with all the glue.

• If insulation cannot be laid evenly, you can try to fill the gaps with foam.
• At the end, the removed sheet of the door leaf is put in place - and the door is ready. Now it is insulated and ready to serve for a long time.

If the door is not collapsible, we will use another method. We can curtain it with a thick cloth.

Another solution involves the use of welding and self-tapping screws. As a result, the pipe is installed. From above, everything is finished with the material that best fits the door.

Warming of wooden doors

Warming of the entrance door from wood should be done with its fitting. Then the door leaf should lie down tightly against the box - the smaller the gaps, the better for you.

When performing this operation, we should use:

1. Plane
2. Ax and hacksaw (if the design is massive)

When performing the door fitting, it should sit tight. It’s perfect to fail, but the door should sit tight

Please note that it cannot close during the wedge. So, when warming from the humidity of the air, it will be difficult to open it, and it will become even more difficult to close.

Further warming of the entrance door with your own hands is designed for the insulation of the remaining "non-removable" gaps. One way is to nail a strip of felt or other similar material along the contour of the door frame.

This strip-insulation should be placed tightly against the door leaf. The thickness of the material should be selected to cover the gap by 2-4 millimeters. The width of the strip should be 15 ... 25 millimeters. Such dimensions will be quite optimal.

How to insulate the entrance door with the help of other materials:

• A reliable method of insulation will be inserting a rubber seal. It must be inserted into the slot. You can buy such a compactor in hardware stores or in supermarkets. The difficulty is cutting the slots you need.
• Use the pre-made door seal. To resort to such materials should be in the most extreme cases. They hold unreliable. They are made most often from rubber, foam rubber. They do not have durability.

Чем утеплить входную дверь вопрос сложный. Используя резиновый утеплитель вы сможете обеспечить хорошую теплоизоляцию. Чтобы достичь еще большей изоляции двери ее можно попробовать обить дерматином, хотя бы с уличной стороны. Под обивку (см. Обшивка входной двери своими руками: что и как делается) чаще всего закладывают foam rubber (также возможно использование одеял, войлока, и т.д.).

The downside is that such a door will be heavy. It may even need to be outweighed. And around the perimeter of the roller will be formed seal.

How to insulate entrance doors: video

Как утеплить дверь foam rubberом

Вы ищете, как самому утеплить входную дверь недорого. Тогда попробуйте самый распространенный и доступный материал – foam rubber. Входные утепленные двери это один из шагов сделать ваш дом теплее и уютней.

Сам по себе метод утепление foam rubberом не является лучшим способом. Это при условия, что вы будете утеплять только по бокам двери. А используя его по все двери с обеих сторон можно. Такой метод хорошо подойдет для утепления деревянных дверей. Итак, как утеплить входную дверь foam rubberом?

We will need:

• glue
• foam rubber
• wooden slats
• threshold board
• upholstery fabric

I would like to say that the fabric that we will use to warm the door is better to choose with water-repellent characteristics. It can be artificial leather or sackcloth.

Insulated entrance door provides you with the necessary comfort:

1. The first step is to remove the old coating from the door. Then carefully wash the door itself.
2. Дайте ей высохнуть и обglueте ее с внешней и внутренней сторон foam rubberом. Его перед этим следует клеить между собой для большей надежности. При чем склеить можно и в несколько слоев.
3. After that, we cover the door with a cloth or leatherette. If you want to decorate it, you can use decorative nails for wallpaper. Remember, the more nails you use on your door, the worse it will be to keep heat.

Please note, hammering nails, you thereby improve the appearance, but the insulation will be less.

How to warm the front door? How to act with the door frame when warming?

Вам следует набить по периметру дверной конструкции предварительно обтянутой foam rubberом и тканью рейки. Они должны быть прибиты с таким расчетом, чтобы дверь в закрытом виде плотно прилегала к ним.

При выполнении данных условий не должно оставаться щелей. В конце вашей работы при использовании foam rubberа входная дверь попробуйте закрыть нижнюю щель порогом. При этом старайтесь обойтись без зазоров.

Is it possible to warm the front door so that it does not miss the cold?

Remember that choosing options for insulating entrance doors should be understood that you cannot reduce heat loss to zero. Comparing the insulation of doors with the insulation of the walls of the house also can not.

No matter how you try to improve the door, it will let the cold through. This is due to the fact that the thickness of the entrance door is noticeably less than the thickness of the wall. Thereby, heat loss will occur.

If you increase the insulation of the walls of the house, you can use foam thickness - up to 100 mm or more. With the door this option will not work. The design of the door leafs does not allow the use of thick foam. Technically, it is possible to apply, but in practice it is irrational.

Insulated entrance door contributes to thermal insulation, but we must also take care of the slopes (see Finishing the slopes of the entrance door from the inside with your own hands). Planning, than to warm the front door, be prepared to insulate and slopes. Especially on the inside of the door. Warming doors will be bad if you do not follow these rules. Insulated entrance door requires an integrated approach.

You may not pay attention to such details, but they are key. Warming the front door, we first of all think about our house, how comfortable it will be in it. Do not spare the time and resources on the insulation of the house.

If you understand the technology, it is quite simple. In the middle of the door fit insulation. Better fit front or some other foam, which is at hand. Technologies for weatherization of the door are not exhausted by filling it with foam plastic and are not even reduced by the creation of two sealing contours.

If you do not properly make the slopes around the door, do not insulate them and do not follow the density of closing the cladding and material, then any measures to insulate the front door will not be very effective.

Now you know you know what and how to warm the front door - act!