How to remove the old paint from the door and cover with new

24-05-2018

Doors

Painting the old door is an important point in the issue of repair. Especially if the door is not one, then after restoration they should have one color and shade.

To do this, they must first properly prepare. How to remove the old paint from the door, we will tell first of all, because with this we must begin.

Then the old door will be prepared for painting and at the end you will learn how to paint the old doors with varnish. The same video in this article will show you the whole process clearly.

What to consider

Beautiful antique doors will decorate almost any room. Only the coating should be applied evenly and correctly.

Let's take a closer look at how to prepare the old door for painting. This is quite an important point.

After all, evenly the dye will be applied only on a fully properly and uniformly prepared surface.

For everything to be initially good, you need to remember some things:

First of all, pay special attention to the qualitative removal of the previous coating.. You can not have anything left. Otherwise, the plane will not just not be even, but the old paint will begin to swell and spoil the entire surface. You will do everything with your own hands and therefore do the job for yourself;
When buying a putty note, there is an instruction and it should be read, especially if your door is not in a constantly heated room, what temperatures does this material tolerate. It is likely that he can not be at sub-zero temperatures;
When you make a purchase of paint (see Paint for doors: choose and make painting) or varnish, then take the banks under one serial number. The fact is that even one color, but released in different batches has not the same shade. And you can spoil everything.

How to repair the door

Now we will understand directly how to paint the door under the old. This work is carried out in several stages.

They are all important. Not only the appearance but also the durability will depend on their proper and high-quality performance.

Remove paint with hair dryer

We begin, perhaps, with a discussion of the topic of removing old paint from the door. To restore the door, it is necessary to qualitatively prepare it for coating.

This question is the most important and significant in the process of restoring the door, bringing it in order.

So:

Work on removing paint from the door should be carried out using one of the methods. Each person chooses which method of paint removal suits him better.
Heat can be applied to the surface and a regular hairdryer is used for this.. Thus, the work will be done as it should be. For this method, you will need a spatula.
Initially, the plane should be heated with a hair dryer.. To do this, wipe the surface with a cloth that needs to be moistened beforehand.
Next, the coating should brew a little to get a little damp.
Next, using a hair dryer, we warm the surface so that the paint starts to swell a little.. Thus, it will begin to flake off.
Next, using a spatula, you need to remove the remaining paint.. If some paint remains on the surface, it must be removed. Using a spatula, remove all paint until the surface is clean. After the main layer is removed, paint stains are removed with a spatula corner.

We remove paint using a chemical method of removal

This method involves the use of caustic soda:

Caution: It is important to remember that this method can not be called the safest of all. For such work, you need to wear rubber gloves and wear old clothes.

Caustic soda solution should be poured into a specific container. Using a brush, apply a thin layer of liquid to the surface.
Then you can see how the paint starts to bubble, then it starts to move away by itself.
With a spatula, you need to remove all the paint that remains.

Surface preparation for painting

At the second stage, the surface is prepared for painting (see. Doors for painting: we make preparation and paint). It is very important that the coating was applied evenly and efficiently.

So:

Next you need to perform grinding the plane. The best tool for this process will be a grinding machine connected to a vacuum cleaner. In addition, you can use sandpaper.

Attention: When using emery paper, you need to apply a bar that would be with a smooth surface. It should be covered with paper. In this case, a flat plane is obtained.

With this method will be eliminated scratches, as well as dents.
After that you need to remove the remaining paint. Minor scratches need to be removed with a putty, which you need to buy before starting work. Putty should be applied with a spatula after thoroughly cleaning the surface.

Attention: It is very important that the chosen putty be for a wooden surface, as well as the required color. The color of the filler is chosen to match the color of the lacquer coating.

It is necessary to take into account the fact that the old tree can become very black. In this case, you need to try to make it whiter. This can be done by bleaching powder, which must be diluted in a ratio of 1 to 3. Then, using a soft brush, apply the solution to the surface.

Door painting process

It is possible to paint the doors not only with the help of varnish, but also with the help of another solution. Very interesting look doors that are painted antique.

With the help of a spray gun, it is possible to paint the door like this. A brush should be used when it is necessary to paint only one door. It is very important to choose the softest brush.

Attention: Naturally, it is important to understand that before starting work you need to fluff the brush. After that, it is necessary to remove unnecessary nap, so that in the future it will not fall out, and also not spoil the surface.

So:

It is necessary to apply the coating in three stages. To do this, use a roller. Do not use a roller made of foam. It is this roller determines the uneven surface coating. The coating is applied neatly, preferably in several stages, starting from the angle in the right direction. Next, it is important to wait until the surface is dry.
In the case when it comes to working with panel doors, the coating should be applied to hard-to-reach places of the panel. It is not necessary with a brush to collect a lot of paint. In this case, all the work will be spoiled. Varnish must be selected correctly.
Clear varnish is not suitable when the door is not evenly painted. It should be noted that after the door is processed, the plane must be covered with a roller.
Next, the door must be left to dry. In principle, the work can be considered complete, as the door is ready.
It is imperative to wait for complete drying, so that the paint does not move away. This condition is mandatory, since the result of the work will depend on whether the surface dries or not.
Before you put the door in order, it is important to remember that you first need to choose the source material. It can be paint or varnish. It is very important that the surface is well prepared. In addition, no less important component is the correct application of all materials. The further outcome will depend on how well the surface is treated. It is very important to acquire only high-quality materials, that is, varnish and paint.

Now you know how to remove the old paint from the door and how to paint the old door with varnish. You can see the photo and get to work. The price of work is not so high. The main thing in this matter is not to rush and do everything correctly.