How to install interior sliding doors - beautiful and

Before answering the question of how to install interior sliding doors, let's determine for ourselves exactly why we should choose them. What is special about this design? Why is it considered better than other types of doors? Let's answer the questions that interest us.

• in terms of visual perception, makes your room bigger;
• due to the fact that they save living space, there is room;
• each dwelling is transformed into a single whole, which creates the effect of infinite space.

In addition, the classic doors in their design performance are very diverse. Using such, you can create a unique, refined interior. The main task. is the transformation of living space.

They are the most favorite interior decision of modern designers. At its core, such a door is a wooden (less often glass) canvas that is placed from the ceiling to the floor.

A very important role in the question of how to establish is played by its components and mechanisms, which we will discuss later.

Cloth, box, accessories - a single mechanism

How to install, we can understand, after we understand its elements. Without knowing the structure, it is impossible to proceed with the installation!

Main elements

Each of them consists of the following parts:

• Door frame and trim. The door frame is a special U-shaped wooden construction, which is mounted in the opening. This box performs the function of the holder of the canvas, is the foundation of the future door. Pavilions are wooden planks that perform a decorative function. Platbands are decorated with an opening (see. Installation of interior door trim).

• Canvas. In fact, this is our very door. Depending on the size, the canvas can consist of either a single piece of wood, or of several parts.

•  Guides. This is the main mechanism that provides movement and work.

•  Fittings. It's simple. Gentleman's set of accessories is supplied. Remember that they can not use the usual door handles for swing. They will interfere with the travel of the canvases into the wall.

• Cassette. This is an additional option that is not always supplied as standard. The cassette solves a number of issues. How to install a door with a cassette? Everything is very simple. You will have to break the wall and install a cassette in it. This will allow the door to go straight into the wall.

Tip! Do not save on accessories and mechanisms. If you buy substandard parts, then in the future your door will begin to rattle and jam.

Proceed to install

Answering the question how to install, we can divide this process into several stages:

• Preparatory stage. If the door to you was delivered to the assembly, then you have to dismantle all the accessories from it. Next, select the slot in the bottom end, according to the dimensions specified by the manufacturer. Put the canvas on a pair of combined tables or a goat. Mark all media at the top of your canvas. Take an awl and make neat holes in the canvas. After these operations, through the cuts made in the media, mount them on the upper end.
• Fasten the support bar. Measure and cut the required piece of support bar. It must comply with the dimensions specified by the manufacturer and must be 50 millimeters longer than the guide. Next, drill the special guide holes. After that, attach the bar to the opening. From one side it should protrude at the length of the web Drill holes in the places of the final fastener strips. Remove the support bar and drill the holes completely. After that, substitute the bar and fasten it with suitable screws.
• Mounting the top rail. We came to the middle of the answer to the question of how to install doors. Using the self-locking nut and the fitted screws, fasten the bracket to the guide. Install the rail near the support bar. You must match the center of the guide with the edge of the opening in the direction of which it moves. Drill marked holes. After you have fixed the guide, insert the wheel blocks into it.
• We hang the door. Move the roller blocks so that each of them stands parallel to the carrier. Raise the door leaf slightly and insert the bolt heads in the slots of the carriers, tighten the nuts a little. Lock the door with wedges. Check the distance to the floor, it must meet the standards specified by the door manufacturer. Adjust the door stroke, tighten the nuts and remove the wedges.
• Fasten the bottom shoe. Translate the door to the open position. Make sure she does not jump off the rails. Place the lower shoe on the floor on the opening side. Make sure the shoe is under the groove of the bottom end. Mark the holes with an awl and screw it to the floor.
• Install the stoppers. First we need to assemble the supporting plates and stoppers with special screws from the kit. Then insert the stopper at both ends of the guide (where there should be places for fixing the stroke). Tighten the screws. The installation of the stoppers is over.

Congratulations, you installed the door yourself and now you know how to install it.

Tip! If you are going to install sliding, then do not pursue massiveness and luxury! In a small neat apartment will not fit massive doors with glass leaf. Observe the general interior view (see Interior doors in the interior), otherwise, your home may turn into a tasteless dwelling.

Pitfalls and disadvantages

After you have learned how to install a sliding door, you should learn about the disadvantages of this design:

• they let in smells and they have low noise insulation;
• due to the design, they can transmit light and draft;
• they are more expensive than other types of doors;
• their installation is more difficult than installation of other types of doors.

Over time, the door mechanisms wear out and the following situations may arise (this is especially common when using low-quality parts and fittings):

• rattling occurs;
• they may move unevenly or open with jerks
• they can jam.

What we get in the end

Weighing the advantages and disadvantages of these doors, we can safely say that such doors are the best option. They not only look solid. Unlike swing, sliding saves space.

This is very important in the conditions of small footage of domestic apartments. If you open them completely, then we visually get a large space. This technique is used by modern designers to give the room a studio look.

By installing a sliding door, you will get extra security, as there are no sharp corners in such doors. For example, if intolerable little children dwell in your home, they will not suffer if they hit the corner of an open swing door.

Also, they exist in various price categories. There are enough varieties of sliding doors on the domestic market to satisfy even the smallest budget. In the end, if you allow the layout and size of the apartment, feel free to install sliding. This is a great solution for home, apartment or office!