How to choose the entrance metal door to the apartment

Reliable door guards your peace. The front door is the first impression of your home. How to choose a metal entrance door to make it beautiful and meet all safety requirements? We will tell about it in this article.

• Excellent security features. The door must be resistant to all possible attempts.
• Having the ability to control access to housing: armored glass, peephole.
• Warranty, fame of the manufacturer.
• Access control, the presence of a peephole or glass on the door.
• Good protection from extraneous noise and heat insulation.
• Aesthetic appearance.

Depending on the materials used for their production, types of entrance door blocks include: metal, aluminum, wooden, plastic.

Read the same:

• Entrance wooden door with his own hands: the power of any
• Do-it-yourself metal entrance doors - reality or utopia

A good metal door includes the following elements:

• All-metal sheet without the presence of welds. The seams weaken the design.
• The set should be trim which covers the cavity between the opening and the box. Without the door trim is vulnerable.

The presence of the porch, which is an additional factor that prevents the burglar.

When considering how to choose entrance metal doors, it is worth paying particular attention to stiffening ribs, the properties of doors to retain heat, to absorb extraneous sounds. It is hardly possible to check the door for impact resistance or resistance to cracking.

There will have to trust the specifications. Sheet metal should be at least one and a half mm in thickness. The correct thickness starts from two mm.

Take a closer look at the locks. There should be two of them (ideal). Buying metal entrance doors how to choose locks? As a rule, doors are equipped with two types of locks: cylinder and suvaldny. It will be much more difficult for a criminal to open both locks than one.

Now manufacturers offer internal hinges and locking fixings. This will protect against removal from the loop. Although in practice in 9 out of 10 cases, the thief will take advantage of weak locks, and he will not break the door block at all, especially in an apartment building.

Heat and sound insulation

A good door should securely store heat in the home (see How to insulate the entrance metal door), protect it from external sound streams. How to choose a metal entrance door to get the listed qualities?

Double seal across the door leaf:

• Decorative panels, which themselves perform the above functions, due to its thickness of eight mm.
• The presence of insulating materials inside the door leaf: for example, mineral wool or foam.
• High-quality clearance gaps between the canvas and the box. Concrete can be used as a material. Also the doorframe is filled with concrete.

Exterior door

Buying metal entrance doors, how to choose its decor? Here you should rely not only on your taste, but also on practical aspects.

If the choice is on a richly decorated door, but there is no concierge at the entrance, or at least an intercom, it is not the most reasonable decision to buy an expensive-looking door. It is also worth bearing in mind the climatic zone, since, for example, high humidity adversely affects some types of wood flooring.

The interior of the entrance door must be in artistic unity with the interior or, in any case, be neutral to it. Metal doors are ennobled by decorative panels, which at the same time also increase the insulating properties and sound absorption.

Finishing materials can be different: veneer, laminate, MDF, etc. It all depends on the fullness of the buyer’s wallet.

If you have doubts about how to choose the entrance door with a small budget, you can consider a few tips that will help in choosing:

• Economy option is perfectly suitable for office and suburban premises. Often, cost savings are achieved not due to the deterioration of the strength characteristics of the door, but by using inexpensive finishing materials.
• Use laminate instead of an array. The basis of it is based on wood drape, in the outer part - a film with imitation of expensive tree species.
• Powder coating allows you to have thousands of variations of shades, and even create a different texture, if metal and ceramic additives are added to the coloring base. This is an economical option, but allows you to give the door a solid look. In addition, this door is resistant to moisture and temperature extremes.

It should be noted that the decorative decoration (see the design of the entrance door) has absolutely no effect on the main consumer property of the doors - the protection of residents from the outside world.

Tip! Buying metal entrance doors: how to choose accessories?

1. Compatibility with door trim.
2. Compatibility with fittings located near interior doors.

Locks

How to choose metal entrance doors so that they are safe? Locks are a key issue. As mentioned above, the door must have two locks of different systems. One of them is suvaldny, and the second to choose from - cylinder or pin.

The presence of locks of different systems creates additional difficulties for thieves, they will need much more time to open the door. It is desirable that manufacturers of locks be different, since the same manufacturer often uses the same scheme in locks.

Level locks are believed to be the most reliable and efficient. Most often, they are crab-shaped, such, where bolts-tongues travel in two or four different directions in relation to the door leaf. However, the more complex the lock design, the greater its cost.

The second lock can be cylinder. These locks are very difficult to open.

It is also worth using armor plates, which will increase the resistance of the cylinder lock larvae to cracking. In the case when the locking bolts are hidden in the metal rotating tubes, they are almost impossible to cut.

Metal entrance door: how to choose a lock, because there are so many of them! Pay close attention to the manufacturer of the lock design. Import locks are considered to be of higher quality and durable. Many of them have from half a million to four billion key combinations.

In addition to locks, it is necessary to use the latch, intended for locking the door during the presence of the owners in the apartment. In the case of an attempted robbery, the door closed on the latch is almost impossible to crack. The reason is its reliability and simplicity.

Even if you strike with a sledgehammer, you will not achieve a positive result for the robber, since the force of the blows will be distributed throughout the door. Unlike locks, the latch, as already mentioned, is simple - in case of fire, it is easy to get out of a burning apartment locked in a latch, but locks can become deformed by fire and the door will jam.

Structurally, the heck are divided into overhead and embedded, having a lock and not having it. A properly mounted fastener removes the difference between the invoice and embedded design.

You may also need a retainer if you have to open the latch on the reverse side, since it is almost impossible to put objects through the door slits. Above all, the door with a heck stops vibrating, leaning more closely against the door box.

In some situations, a door chain may be needed. However, such a chain should be much stronger than a similar chain for a wooden door.

Hinges

Hinges are hidden and external (see. Hinges for metal doors). Hidden hinges are better because they can not be cut, because of their physical inaccessibility.

According to the State Standards, however, the doors must have external hinges. Security doors must necessarily open not inwards but outwards. Such loops can cut down.

If, however, a door with outer hinges is selected, make sure that the anti-pins are available (special bolts). When the door closes, the bolts move into special holes in the box and firmly fix the door leaf in the opening. As a result, the cutting of loops will not help criminals.

Poor-quality hinges lead to the fact that the door leaf sags and begins to cling to the box, or even completely wedges the door.

Peephole

Choosing input metal doors how to choose optics? If you can do without an armored sight glass, then a peephole is needed. The peephole plays an important role in ensuring the safety of residents. It should provide maximum visibility. It is necessary only to bear in mind that a higher viewing angle means worse clarity of visibility.

Highlighting the lock well

This accessory is needed if your doorway is poorly lit or lamps often burn out. One click on the button hidden inside the knob can highlight the keyhole area.

Is it right to buy a door for a special order? If possible, allow, of course, yes.

Custom doors have several advantages:

• Doorways are not standard sizes everywhere.
• Local manufacturers, who respect their reputation, carefully ensure that the doors of their customers are in proper condition.

Let's sum up. How to choose metal entrance doors so that the purchase does not disappoint?

• The high-quality door should not have distortions and deformations, should have an ideal geometry of the design.
• The door should have two good imported locks of two different designs: lever (crab) and cylinder.
• The presence of the seal on the perimeter of the door will provide additional sound and heat insulation.
• Installing doors improperly may negate all the advantages given by its manufacturer. Do not save on high-quality installation.

We hope our story about how to choose the right metal door was interesting!