How to fix the wall paneling to the ceiling
Lining - artificially created finishing material. It is used not only for interior decoration, but also for exterior. The popularity of the material due to its characteristics, ease of installation and durability.
This material allows you to level the ceiling "under zero", which has a positive effect on the appearance of the room. Different ways of laying lining allow you to "play" with the space, increasing, expanding or reducing it.
Varieties of linings
Wooden. Lining made of wood fits perfectly into any interior solution due to its natural look. The material is environmentally friendly and, therefore, it has become very popular due to this characteristic.
For the production of wooden lining use only high-quality wood, preferring coniferous species, as the processes of decay they are almost not affected. If the material is used for finishing steam rooms, the resin content in it should be minimal. Without knowledge of the characteristics of this material, you will not understand how to make the ceiling of the wall paneling.
From pressed hardboard. For those who hear about the paperboard for the first time, we give its more popular name - MDF. On each panel of extruded hardboard there is a protective layer that can have a smooth or rough surface. The apparent lack of such a material in low moisture resistance, which makes it impossible to mount it in rooms where increased humidity is possible. Excess steam in the air can cause the ceiling of the wall panel to swell and lose its appeal.
The disadvantages include the large weight of the wall panel, which makes it difficult and slows down its installation.
Note! The material should not be exposed to moisture even when cleaning, which significantly reduces its popularity, although its appearance is very presentable.
From PVC. The exact opposite of the previous version of the wall paneling, because PVC panels are not afraid of moisture. Everything else, the material also has antistatic properties.
PVC clapboard has a cellular structure, so the panels are light and simply attached.
Material selection
By what external signs can you distinguish high-quality material, how to make a ceiling from a lining with your own hands and at no extra cost? Now we will try to figure out and find the answers.
- Range. The colors offered by manufacturers allow you to experiment with space and its design, but buyers often prefer the white ceiling because of its ability to expand the space.
- Appearance. Panels are matte and glossy, but the first option is more practical. It is much easier to stain the glossy ceiling than the matte one, there are visible stains on the gloss from any touch. It is also important how to fix the wall paneling to the ceiling, because you can initially make it ugly.
- Suture or seamless. Of course, the last option looks better, but the price for such panels is higher.
Instruments
We will be guided by the fact that the ceiling will be finished in an ordinary apartment located in a house with concrete walls. Any changes to the base, walls, or other room parameters may entail a change in the tool list.
- Perforator. In addition to the perforator, we also need a 6 or 8 mm drill bit, with which it is necessary to make several holes for the batten.
- Screwdriver, but you can do with a screwdriver.
- Stapler. We will need this tool to attach the wall panel to the prepared base, but you can choose a more reliable method of fastening with screws.
- Bulgarian for cutting panels.
- Level to check evenness.
- Pencil for marking.
- Sawing.
For crates need high-quality material, so the bars of 20-25 mm are perfect.
Note! For damp rooms wooden crate is not suitable.
We are going to frame
When finishing the ceiling with clapboard, the most important thing is to properly assemble the frame. For self-installation using metal or wooden parts. The wooden frame is several times easier to assemble than the metal one, and fixing the lining to the tree is much easier. Different design and cheap.
Note! Each wooden bar must be checked not only for horizontal position, but also for perpendicularity to future rows of lining. The maximum distance that the bars can be removed from each other is 40–60 cm for plastic and 60–100 cm for wood.
Focusing on these indicators, you can safely proceed to the calculation of the number of bars or metal profiles, and how to fix the wall paneling to the ceiling and the rest of the nuances we will analyze below.
To fix the guide, you just need to attach it to the ceiling with screws. In the same way, both metal profiles and wooden bars can be fixed. For high-quality installation, you may need self-tapping screws with different lengths, since there are practically no perfectly smooth ceilings, and in some places you will have to insert wedges.
Note! If during operation the humidity in the room increases, then the wooden structure should be treated with linseed oil, which will help protect the material from rotting.
The crate must be attached to the metal structure with a perforator. After completion of work with the frame, proceed to the finish to the ceiling of the wall panel turned out high quality.
Clipboard fasteners
It is not recommended to start work from two corners at the same time, even if there are many assistants and they have nothing to do. For fixing lining better to use furniture studs, as they have small caps, which are almost invisible. Undoubtedly, for reliability, you will need to screw in a dozen screws, but they will not be so much. This is how the ceiling is trimmed with wooden clapboard.
To fix plastic lining, it is best to use a construction stapler. Each panel material must be fixed "groove in the groove." Do not forget to constantly check the horizontal.
A little effort and you can enjoy a perfectly flat ceiling. Characteristics of the material allow it to be used for many years without loss of properties. The main thing is that the material was of high quality and free from defects.
Video
We invite you to see the process of finishing the ceiling clapboard.