Tub for concrete - types of structures and their features

In order to carry out concrete work as efficiently and cost-effectively as possible, it is necessary to use special devices, the most important of which is the capacity in which the solution can move around the site and be stored for some time. If the concept of a bucket for concrete, a shoe or a glass does not mean anything to you, then after reading this article you will understand the features of each type of equipment.

Overview of the most popular options and their advantages and disadvantages

As noted above, two types of structures are mainly used, and you need to decide which one is suitable for a particular construction object. They differ in many characteristics, and it is important to choose the best option.

Design like a glass

Tub glass for concrete refers to one of the simplest types of products, which provides invaluable assistance in the process of work. But you need to understand that the products of this type may differ from each other, and it is not easy to choose a specific option, even if you are not buying, but renting a device. After all, performance and usability depend on the right decision.

Consider what criteria should be paid special attention, whether it is the purchase of new equipment or used units:

• The material of the product, most often it is steel, must be very durable.. Insufficient thickness does not provide the necessary reliability. If you choose a used bucket, then pay attention to the absence of damage, sometimes their removal will cost more than the product itself.
• Also check the other elements - each node should be strong and reliable..
• If you need a fixture with a capacity of 1 m3 you should not buy the option twice as much: it is much harder, and it will be inconvenient to work with it.

Tub for feeding concrete of this type consists of several main parts:

• The main tank, made either simply in the form of a cone, or as a cone with a cylinder on top. Features of this system depend on the required capacity.
• The support system is also very important, it can be of various configurations. The main requirement for it is the strength and stability of both empty and full containers.
• A very important part of the design is a valve with a handle, with which the solution is discharged, the valve must be durable, and the opening knob must be comfortable. (See also the article Aerated concrete facing: how to do.)

• Eyes for fastening the structure to the crane and its lifting are very important, because the safety of everyone on the construction site directly depends on this.

Note! Remember that this type of construction is fixed, that is, unloading is always performed in the same direction. This is convenient when pouring static structures of the same type, but sometimes a more precise solution distribution is required.

Shoe Type Design

This is a more progressive option, but its price is noticeably higher, the requirements for strength and quality of materials for such structures are similar to those discussed above. (See also the article Concrete rubble: features.)

Instructions for checking the product with your own hands is as follows:

• First, carefully examine all the structural elements for reliability and lack of damage.
• If the unit is used, then look inside the bunker: if it is not cleaned, then a layer of frozen concrete can create you a lot of problems.

This option has a number of advantages:

• The design of the product is rotary, which allows you to adjust the direction of discharge of concrete and improves the usability of the tub. It is this advantage that determines the popularity of this type of product.
• On the structure there may be a platform for installation of the vibrator, which significantly speeds up the process of unloading and does not allow the concrete to stick to the walls.
• Another undoubted advantage is the ability to load the solution, both from the mixer and from the dump truck, this can simplify the work and reduce the cost of it, since special transport is much more expensive than ordinary trucks.
• With a large capacity and reliability of products, their mass in the unloaded condition is relatively small, which increases the convenience of transportation.
• It is much easier to load such containers, as this is done with a horizontal position of the bucket (transportation is performed in an upright position).

Some features of the operation of construction devices

As noted above, it does not always make sense to purchase a bucket, sometimes it is much easier to rent it or even use the services of transporting concrete, since carrying out the work with your own hands will require too much effort.

This applies to many jobs, for example, cutting reinforced concrete with diamond circles without special equipment takes too much time and money, and diamond drilling of holes in concrete is an impossible task without expensive tools. It is much easier to use the services of professionals who quickly and efficiently carry out the work.

Tip! But if you already have one bucket or several containers, it is necessary to maintain them in working condition and to monitor the state of the structure every day before starting work. If necessary, some parts can be strengthened by welding, and the paintwork should also be renewed at least once a year, this will provide corrosion protection during the storage of products.

Conclusion

Whichever option you choose, it should be remembered that not only labor productivity, but also the safety of workers depends on the quality of the tub, do not forget about it. The video in this article will help to better understand some of the features of this product group.