The calculation of the beam on the house on their own using

The process of building a house begins with the drafting of the project and the implementation of other preparatory activities. The exact calculation of the required number of timber and other components is carried out in order to ensure timely construction of the house with necessary materials, as well as cost planning. As practice shows, the presence in the hands of a detailed costing allows you to tightly control all costs and minimize them.

This document is part of the project documentation and is developed by an architectural bureau or other specialized organization. When compiling it takes into account many factors that are reflected in the technical task. The cost estimate is agreed with the customer of the project and, if necessary, can be adjusted.

Tip! It is possible to save money not only due to strict control, but also to do the work yourself.

Basics of design and work planning

In this context, we have in mind the whole complex of organizational and technical measures for the construction of a house from a bar on its own land plot.

If you specify a list, then to ensure the process, you must perform the following steps:

1. determine the list of technical requirements for a country house;
2. to draw on its basis a draft design;
3. prepare a list of necessary building materials;
4. calculate the timber for the house and the need for other lumber for the manufacture of subfloor, truss and other structures;
5. to draw up a detailed phased work plan, starting from laying the foundation and ending with the installation of the roof system and roof;
6. to produce a project specification with the preparation of a complete set of drawings for each structural element;
7. on the basis of technical documentation to make a detailed list of timber on standard sizes, for selection and acquisition at a specialized enterprise.

Such an algorithm for preparing for the work will help to ensure an acceptable pace of construction from start to finish. An approximate calculation of a bar in a cube using the simplest methods is necessary at the first stage to evaluate the economic criteria of construction. This is only the first step to ensure that after the end of the work there are no unused parts and elements left that were paid for, but turned out to be superfluous for some reason.

Conclusion

A complete calculation of the house from the timber must be made with all possible accuracy at the design and preparation stage. This will allow you to purchase the necessary materials and use them fully in the construction process without residues.

In the process of making calculations for the construction of a house from a bar, it is possible to use special software. The video in this article will help in mastering this process.