Deprecated: preg_match(): Passing null to parameter #2 ($subject) of type string is deprecated in /web/blog-oremonte.ru/page.php on line 13
Ready projects of baths from a bar: advice and - Blog about repair

Ready projects of baths from a bar: advice and

19-01-2018
Building

Timber is a fairly durable and reliable material for the construction of any type. At the same time, its ecological purity and natural properties are much higher than those of other types of products for the erection of buildings. That is why ready-made projects of baths from a timber, which are free of charge located on our site, are very popular with modern masters.

Option ready plan placement of rooms in the bath with a graphic image of the future design

How to choose a project

First of all, it is necessary to understand that there are a large number of various structural and technical features of this structure. All of them have their fundamental differences that affect the functionality of the room and the principle of the steam supply device itself. There are also a lot of features that you should know so that the chosen project is not only convenient, but also safe.

Amateur photo bath from this material with a small veranda

What should pay attention

  • Usually ready-made baths from a bar are quite light structures and for their construction it is not necessary to use massive foundations. However, in the manufacture of these buildings is recommended to establish a solid base, namely, tape or monolithic.
  • The basis of log baths is the proper organization of the heat exchange process. Therefore, to create windows and doorways using the minimum area, which should also be displayed on the project.
  • Special attention is paid to safety. The fact is that the manufacture of baths from a bar often involves the installation of indoor furnaces that use open fire, and high temperatures for these buildings are common. Therefore, the heater is usually placed on a separate foundation and at a distance of 0.5 meters from the walls.
  • When choosing a project also need to carefully study the ventilation system and chimney. If necessary, it can be changed by adapting to specific conditions.

Tip! Choosing ready-made projects for home or bath, be sure to follow all instructions given in them and comply with the proposed size. Self-made changes may violate the functionality of the structure and even lead to the destruction of the building.

Insulation

Considering finished houses and saunas from timber, both in photographs and on projects, it is immediately apparent that the construction of a log sauna does not practically use waterproofing or insulation. In fact, it is not.

The fact is that before starting work on installing the first crowns, a layer of roofing felt is laid on the foundation to protect it from moisture. Also, the installation manual involves the impregnation of several rows of timber with a special composition. However, it is completely colorless, so it is impossible to consider it.

As a waterproofing, you can use a special film

It should be noted that when creating a bath, it is desirable to process the entire construction material with such impregnation. This will significantly increase the life of the room and will protect it from the appearance of mold and mildew, which is very important for places with high humidity.

Tip! Waterproofing and impregnation is best used with additives antibacterial substances. In this case, the treatment must be carried out both from the inside and the outside, and in order to distinguish the impregnated material from the usual one, a little dye can be added to the solution.

Heater с отражающей поверхностью может послужить отличным изолятором для парной, поскольку не выпускает инфракрасное излучение изнутри

Heater

In order to reduce heat loss and the amount of energy needed to kindle a bath, it is best to warm it. In this case, you can use any available material, the price of which allows for an inexpensive outer lining. Inside the premises leave the wood, which can be treated with sandpaper and covered with a protective solution.

At present, liquid types of materials are best used as insulation. They are easy to apply to the surface with their own hands using a conventional brush, and without expensive tools. At the same time, they do not take up much space and do not require additional sewing or processing.

Tip! To preserve the temperature inside the room and reduce heating costs, you can use a material on which a layer with a reflective surface is applied. His best to have in the steam room.

The interior of such a structure is best made of natural materials, and as mounting elements use wooden pins

Conclusion

In the presented video in this article you will find additional information on this topic. Also on the basis of the above material it can be concluded that to create such a structure as a bath does not need to make great efforts, but it must be treated as responsibly as in the construction of the house.

In this case, special attention should be paid to such things as the organization of insulation and waterproofing, because they help save the kindling and extend the operation of the entire structure. However, the method of installation and the type of its execution must be selected individually, in accordance with personal wishes and design features (also find out how to choose the right interior design of a wooden house from a bar).