How to make a bath out of the bar with your own hands,

Bath on your site - not a luxury, but a necessity. Anyone who has not yet built this practically ritual structure for rest and relaxation loses much. Many do not know how to make a bath out of the timber with their own hands, and it seems that it is almost impossible.

But in fact, nothing complicated here, and it is especially easy to build a bathhouse from a bar.

Advantages of cobbled buildings

1. Ecological purity. As you know, wood is one of the oldest and best building materials. That is why since ancient times baths were built of wood, and this tradition has been preserved until now.
2. The beam perfectly keeps the heat, while passing air. Therefore, inside there will always be a pleasant comfortable atmosphere. Even additional warming will not be necessary.
3. Buildings from this material are lightweight enough, so you do not have to build a powerful, costly foundation.
4. At the bar reasonable price, which makes it affordable for almost any consumer.

1. The profiled bar differs from the rounded log by its strict geometry and almost complete coincidence of the dimensions of the beams. Therefore, it will be extremely easy to fit it to each other.
2. Another difference from logs for the better is that the timber can be laid immediately into the finished wall. But the log house will have to be built, pushing each element to the next, first on the ground, and only then laid on the wall.
3. The finished building will look very neat and presentable. By the way, Finnish saunas are built from profiled wood. Therefore, lovers of this kind of pastime should take into account this fact.
4. Shrinkage of the finished walls will be minimal (no more than 1%), and properly dried material will not give deformations over time.
5. You will have the opportunity to order building materials with the desired cross section and a length of up to 6 meters, with the same size. This almost completely eliminates possible waste, and, accordingly, extra costs.

What to consider when purchasing material

Many wonder what material is optimal for construction, how to choose it correctly, bring it, and how to make a house from a bar to forget about repairs for many years.

Note! When choosing, look, so that there are no wormholes, cracks and deformations on the elements, because such material will have to be rejected during construction. Buy only flat timber with strict coincidence of cross-sectional dimensions. Consider the fact that if there are at least a few bugs in the wood, they will multiply in the future and sharpen the walls with amazing speed. Repair or relocation in this case will be inevitable.

1. Before you make a bath of timber, look at the material in several nearby places. Crude, stained, uneven material should not be acquired, and even if you find such fragments, use them not for walls, but for inserts or additions, after having cut off defective areas.
2. The rejected bars can be used as firewood, or they can be sawn on a circular saw to the required dimensions and used to build a fence, a batten and much more.
3. Store purchased material in a dry, well-ventilated place. If it will lie in the rain for a long time, most of it will then be deformed, screw out and be unsuitable for installation.

1. Before you determine the quality of the timber, find out what wood it is made of. As a rule, conifers are used for timber - pine, cedar, spruce, larch. For finished rows of walls (crowns) it is better to take larch, because it is less susceptible to rotting. The resin contained in coniferous trees not only smells good, but also protects the material from moisture.
2. But it is still necessary to process the timber additionally. You can buy special formulations in the store, and you can make it much easier and cheaper to do it with ordinary engine oil. Each beam is impregnated on three sides, and the first crown is impregnated on all sides.

What is made timber

Many do not even know what a timber is and how to use it as a building material. In fact, it is very comfortable and practical, environmentally friendly profiled wood.

The production cycle

The material is made by machining on special machines, as a result of which a beam with a square or rectangular profile is obtained from a round log. It is convenient because it has a clear geometry, and the elements are strictly the same in size, which cannot be said about the beam. Increased strength has a glued variety of beams.

It is worth understanding in more detail how they make glued laminated timber and what are its advantages.

1. Wood must be harvested in winter, from December through March.
2. After harvesting the tree should lie down without processing for about a month.
3. After drying in a natural way, or in special chambers, logs are sawn into dies.
4. The material is being finalized, even before making a groove in a bar, uneven is rejected, then each element is thoroughly polished and leveled.
5. All slats are customized in size, then glued with a special adhesive on a natural basis and go under the press for maximum adhesion to each other.
6. Dried glued blanks protsevuut, profiled and cut the corner joints of timber.
7. The material is cut into beams of the same length. As a rule, according to the standards, beams are made no longer than 6 meters, but if desired, you can also order large sizes.
8. The section is made of several types - 10? 10 cm, 15? 15 cm and 20? 20 cm, etc. When buying a customer chooses a convenient option, which mainly depends on the size of the future structure.

How to make yourself

Some will be interested - is it possible, and how to make glued laminated timber itself, without resorting to the assistance of manufacturing companies. As described above, it is necessary to prepare a tree in the winter, then let it lie down for a month.

Logs with irregularities, rot and wormholes need to be rejected. Next, the logs are cleared of bark, but to prevent cracks, it is left 15 cm wide on both sides. Store the processed logs in a dry place, it is desirable that they do not touch each other and are well ventilated.

Before you make glued laminated timber at home, you should either purchase a circular saw, or arrange a sawmill to process your material. The next step is to cut the logs on the boards, and then glue them together. Thus, you get the necessary material of the desired length, section in the required quantity.

Note! It should be noted that it is precisely glued timber that is distinguished by its increased strength, but also by its rather high cost. Much easier to manufacture is considered simply profiled solid material.

To understand how to make a profiled bar with your own hands, it is enough to look at how they make it in a professional way. There is nothing complicated in the process; just a round log is sawed into even equal beams with square or rectangular cross-section. The same can be done independently, having the necessary tool at hand.

Construction of the bath

Conclusion

Bath is quite easy to build yourself. Even those who have never been involved in construction, and have no idea how to pour the foundation or how to make the floor in the house of a bar, with minimal skills will be able to build a real masterpiece on the site. The main thing is to pay maximum attention to this and do everything with pleasure.

The video in this article will provide you with comprehensive information on the topic discussed, see!