How to calculate the cube timber: tips and tricks

02-08-2018

Building

Timber can be called one of the most simple and popular building materials, which is used for the construction of houses. At the same time, masters often encounter the problem of selling it in one unit of measurement, and using other parameters during works. That is why the question of how to calculate the cube of timber is very interesting for modern builders.

Amateur photo of the stored material, which shows the principle of placement and the need to make correct calculations

Project and calculations

First you need to understand that all calculations must be made at the design stage. This will help determine the exact amount of material and will give the opportunity to immediately find out its value. In this case, some manuals, telling about how to calculate a cubic meter of timber, I advise you to use special tables or appropriate software.

Calculations

First you need to determine the number of beams in one cube.
First, find out the sectional area. This is done by multiplying one side with the other. For example, the bar is 200x200, which means that the desired value will be 0.04 square meters.
Then multiply 0.04 by the length of the material, which is usually equal to 6. As a result, we get 0.24 cubic meters.

In some enterprises, the timber is laid in packs for a certain number and even separately marked

Given the similar results of the manual, telling about how to calculate cubic meters of timber, it is recommended to focus on the fact that in one cubic meter there are four bars with dimensions of 200x200 section.
Having this data on hand, you can make the necessary calculations on the scale of the entire construction. However, it should immediately be noted that when creating a log-like house, materials with various dimensions can be used, which means that this should be taken into account.

Tip! Particular attention should be paid to measurement systems and it is better to immediately transfer all data to meters. Otherwise, there is the likelihood of making an error.

Design

When designing buildings, the manuals, telling about how to calculate a cubic meter of timber, are advised to initially make an estimate of all the necessary materials one by one. Moreover, if more than half of the timber is used, it should be considered as a whole. So a small balance will turn out, but it will not cause serious cost overruns or shortages.

Some masters, when answering the question of how to calculate 1 cubic meter of timber in the design, advise using special tables. They contain all the necessary values and parameters. However, it should be remembered that some manufacturers make products by their standards and have different tables from others.

It should be noted that in some projects give only approximate data. This is usually documentation that was made free of charge or calculated by the program. Therefore, before placing an order, it is worthwhile to additionally check all the results, especially those based on the length of the materials.

With an independent production of the project of the house from a bar, it is necessary to ask the manufacturer in advance all the dimensions of its products. This will help to avoid inaccuracies in the calculations.

Tip! If you do not have the skills to make projects independently, you should use ready-made technical solutions, in which all the necessary calculations are already displayed and even the total cost of the structure is derived.

Some programs not only calculate cubic meters of timber, but also cut it from a log

Special programs

Making calculations with your own hands, you should use the appropriate software. This will greatly facilitate the entire procedure and provide an opportunity to obtain data throughout the building.
The choice of such programs should be approached very responsibly. Some applications of this type are not free, and their price is sometimes quite high. However, it is such programs that allow you to perform almost any accurate calculations for all types of construction work, taking into account any materials.

The appearance of the graphical interface of the simplest construction calculator

Individual applications are designed to work on platforms that use mobile devices. This allows you to use a similar calculator directly on the construction site, making all the necessary calculations in place.
It should be remembered that a separate instruction is attached to each such program, which indicates its features and principles of forming calculations and data. In this case, the violation of the rules for using the application can lead to large errors and inaccuracies.

Only correct calculations and a well-designed project will help build a high-quality building and avoid material shortages and waste.

Conclusion

In the presented video in this article you will find additional information on this topic. Also on the basis of the text presented above, it can be concluded that it is quite simple to make usual calculations of the material in cubes. However, when it comes to the scale of the whole structure, the artist may be required to have certain skills and knowledge.

In this case, it is necessary to refer to additional materials or use specialized applications. Although if the practices of the work of such works, it is best to use ready-made projects, where all the parameters have already been calculated and listed in a convenient measurement system.