How much is a bar for home: making calculations
Timber is a very popular material that is great for building small houses, bathhouses and other structures. At the same time, it has a rather high cost, as it is natural and in some areas it is very difficult to get it. That is why, before starting construction, you should find out how much a timber for a house costs.

Pricing principle
First you need to understand that accurate calculations will not work. The fact is that the final price will be formed taking into account many different factors. The most decisive of them are the type of material used, the quality of the prepared project and the correct calculation of additional costs.

Types of material
- The most expensive is glued figured timber. This cost is due to its production. However, the majority of craftsmen believe that due to the almost impeccable dimensions of such products and a large selection of various additional elements, you can save on installation by minimizing the amount of residue.
- Ordinary material has a more reasonable price, which is formed from the quality and grade of products.

- Determining how much a house is from a bar, special attention is paid to dimensions. Some people believe that if the payment is made per cubic meter, then the parameters of one unit of value do not matter. However, it is immediately worth noting that a timber with large dimensions may have a price an order of magnitude higher than a smaller material.
Tip! Taking into account similar circumstances in the project, it is necessary to calculate the necessary amount of each individual type of products in order to make it easier to know their final price.

Calculations
- Considering the fact that this material is measured in cubic meters when selling, then calculate how much a house of laminated veneer lumber or other material costs is necessary using a similar system.
- First of all, you need to decide how many units of a certain type will be required for construction. This is best done using a project in which there is a plan for laying the crowns and a profile display of the walls of the timber structure.

- At this stage, the installation manual advises to immediately take into account that if a small segment is longer than half of the whole unit, then it is considered a full-fledged element, without planning to use trimming. This is done to simplify the work and create a small margin, which can be useful during installation.
- Special attention should be paid to the length of the timber. It is best to select the material according to the size of the structure, so that you do not trim each element with your own hands. It should be noted that professional masters and designers are trying to specifically create projects in which the capacity is minimized.

- It should also be remembered that not all manufacturers make eight-meter bars, and those who do this put a fairly high price on them, knowing that this material is not often found, and its use in the construction of structures with large dimensions allows save a lot.
- After all the preliminary calculations are done, you must first calculate the volume of one product. For example, a bar 150x150x6. This not only allows you to understand how much it costs to put a house out of a cant, but also determines the type of transport you need for efficient transportation.

Note! The photo above shows a rough version of the calculation of the costs of various kinds of lumber. They are necessary for the construction of a residential two-story house with a total area of ββ155.5 cubic meters and a wall thickness of 200 mm
- 150 x 0.150 x 8 = 0.18
- Based on these calculations, it turned out that a specific unit of material occupies a volume equal to 0.18 square meters. Therefore, to find out the total quantity of the required timber with these dimensions, multiply this number by the data of preliminary works, indicating how many pieces of this product will be needed.
- The final number will be the cubes of the timber of the dimensions that are needed for the construction of the building. It must be multiplied by the cost of 1 m. to get an idea of ββthe price of the entire material.
Tip! For convenience, you should immediately translate all outgoing parameters into meters. This will help to avoid serious errors in the calculations.

Shipping and storage
One of the most important factors influencing how much a house will stand out of a bar is its proper transportation and storage. The fact is that dry wood is used for work, and if not properly transported or stored, it can collect a large amount of moisture.
Given this, many experts prefer to purchase material in small batches that can be delivered with a fully loaded vehicle at a time. At the same time, they prefer to keep the timber already treated with a protective compound, under the film and on a small elevation from the ground.
At the moment, it is worth paying attention to the store's warehouses, since it will not only affect how many years the house will stay out of the beam, but will reduce the price if storage is not properly done.

Conclusion
In the presented video in this article you will find additional information on this topic. Also on the basis of the text presented above, we can conclude that it is not an easy process to calculate the amount of material and determine its real value. To do this, you must have a project in front of you, understand the principle of placement of crowns in the building and be able to work with incoming data.
However, you can always use the construction calculator. Moreover, if you are inattentive or forget about the difference in units of measurement, then even with it you can make a number of errors that will lead to a shortage or too much overspending.