Concrete rings: scope and types

19-06-2018

Building

In modern construction, a huge number of various concrete products are used, which have a very different purpose. At the same time, there are such types of these structures, having an original form and a specific purpose, related more to communication systems than to the construction of buildings. One of them are concrete rings.

Amateur photo of finished products stored in the open air

Features and Purpose

To begin with, it must be said that all such products are manufactured according to strictly defined standards, which are adopted not only in the enterprise, but throughout the country. This is due to the fact that these products are installed in critical places and over time it must be replaced or repaired, which means that strict standardization of production is required. That is why concrete rings are made according to GOST with observance of all requirements.

Graphic image of the ring, cap and bottom

Application area

First of all, this product is used to create concrete wells or technical hatches.

At the same time, craftsmen sometimes do not recommend making them with their own hands, and if it is not possible to purchase such products for such purposes, then another constructive solution should be used.

Ready septic tank assembled from similar products

Also, this material is used to create septic tanks or cesspools.. However, it should be borne in mind that square concrete rings are not suitable for these purposes, since they begin to hold up the compost in the corners, which prevents its processing.
Such products are often used in the organization of storm drains or drains under the carriageway or embankment. In this case, the installation manual in this case recommends choosing concrete products with increased strength and additionally strengthening it during installation.

All concrete products are quite heavy, which means that special equipment may be needed for their transportation and subsequent installation.

Some craftsmen use rings to build small towers.. However, the price of such a design does not justify itself, and sometimes it is much cheaper to use even metal.

Tip! Such products have high strength and perfectly tolerate various kinds of effects. Therefore, it can be used in other works, taking into account the size and type of concrete.

Different dimensions of products from a reputable manufacturer

Views by purpose

It is worth mentioning that the company usually creates sets of products that can be purchased separately. First of all, they include concrete rings of 2 m, which are the basis of the construction of a septic tank or well. However, they may have grooves for installation, and can be mounted one on another vertically on the edge.

Some rings of this type have a special design that best suits their purpose.

Also included is a small concrete ring. It is usually used as a workspace that is intended for access to the main part. It must be said that the connection of these elements is usually made through a special cover with a hole of the appropriate diameter, molded from the same material.

Usually a 1 m concrete ring is covered with a lid without holes or with a special nozzle to create a hatch. These elements are also molded in production, and they are included in the standard set for creating such structures.

It is necessary to mention that there is also a large concrete ring used for the manufacture of water outlets. However, these products have a range of different sizes and are often custom made.

Tip! To acquire all the elements of such systems is only from one manufacturer, because not all enterprises accurately meet the standards, and this will greatly complicate the installation.

Square designs are less popular, but are also used in construction.

Additional views

Concrete semi-rings deserve special attention. They can have a huge number of types and sizes, which can meet certain standards or be made to order.

Half rings are usually made much thicker, and their specific design allows all loads to be properly distributed.

They are used to protect the main lines of communication systems or other similar works. It is important to say that such half-rings with large dimensions are used even in the manufacture of tunnels and subways.

Tip! All such materials must have a quality certificate, which specifies their characteristics in accordance with the tests carried out on the samples. Therefore, such a document must be asked from the seller.

The use of half-rings for fixing and protecting pipes on the surface, which greatly simplifies both the installation itself and the subsequent maintenance

Conclusion

After reading the video in this article, you can learn more about what these products are, and what kinds of them are. Also based on the text above, it is necessary to conclude that such products have a certain scope and can significantly facilitate modern construction.

It is important to remember that concrete rings are not quite strong and strong, but they can not withstand large vertical loads. Therefore, they are not used in the construction of buildings.