Concrete panels: types and scope

14-01-2018

Building

With the development of modern technology began to make various kinds of changes in construction. This is due to the fact that there are new materials that significantly increase the life of the final product and allow you to build buildings of higher quality. One of such products can be called concrete panels for building a house, which are used not only to create floors, but also in the manufacture of walls.

Amateur photo of concrete products, which are most often used to create floors between floors

Types of panels

First we need to say that this article will be considered materials for the construction of buildings, and not for their decoration. Therefore, concrete decorative panels here will not unsubscribe. Also, it is not necessary to enumerate all types of such products, since there are a lot of them, which means that it suffices to limit oneself to separate areas.

External reinforced concrete wall panels, which were specially designed for the construction of houses

Application area

First of all, it is worth noting that the house of concrete panels in our time is no longer a rarity. Almost all construction companies use this material to create buildings of increased strength. At the same time there are houses that are created on the basis of this material.

And there are structures that consist of blocks in which it was taken as a basis.

Decorative concrete products, which are often classified as panels

It is important to mention that such structures have very high strength and when working in them, it may even be necessary to cut reinforced concrete with diamond circles. Also this material very well transfers various fluctuations that allows to use it at production of high-rise constructions.
Some designers often use decorative panels for concrete to trim the bottom of a balcony or loggia, but this system does not carry significant loads.

Recently, they began to produce designs with insulation inside

Most often, this material is used to create floors between floors. The fact is that it is much easier to lay the finished product on the walls than to create it with your own hands, waiting for a long time to dry completely. (See also the article Concrete Concrete: Features.)
Previously, some masters used such material to create interior partitions. However, the price of such structures and excessive weight make them look for more affordable methods and options.

Tip! In modern construction, concrete is used in almost all stages of the construction of buildings. Therefore, you can always find the necessary part or structure when creating your own project.

Composite concrete products for the construction of houses

Weight

The exorbitant weight of such products makes manufacturers constantly look for ways to solve this problem. At the same time, such materials as fiber-reinforced concrete panels or their analogs began to appear.

It is worth noting that in the pursuit of facilitating their products, many companies began to resort to the technology of creating cavities inside the structure. It did not use diamond drilling holes in concrete, and all the work was done at the stage of casting. As a result, in the modern market of building materials, parts with different cavity shapes and their dimensions can be found.

Parts without cavities are less practical, but have increased strength.

Special attention deserve aerated concrete panels. They also have not only internal cavities, but also a simple structure. As a result, not only weight is reduced, but protection against cold is also increased, which is very important when working in certain climatic zones.

Tip! The choice of a specific type of this material is completely imposed on the designer, since an exact calculation is needed not only of the dimensions and mass, but also of the strength of the concrete product.

With the use of aerated concrete, it became possible to create structures of any shape without worrying about their weight.

Recommendations of specialists

Some masters prefer to use gypsum panels, because in some cases they are much more practical and cheaper.

However, before purchasing this material, it is necessary to check all its characteristics, since these products can have a lot of different types, depending on the production criteria.

Products from gypsum concrete are most often produced in the form of blocks.

When building a house, it is best to order all the concrete parts from one manufacturer.. This will solve the problem of compatibility of standards, help to establish regular deliveries and will provide an opportunity to get a good discount.
It is worth remembering that the installation instructions for the panels almost always involve the use of special equipment.. Therefore, its rent or purchase should be immediately included in the estimate.

Recently, the advantage given systems of aerated

Conclusion

After reviewing the proposed video in this article, you can study this type of material in detail. Also taking into account the article presented above, it should be concluded that in modern construction this type of products has found immense use.

At the same time, concrete panels have a lot of varieties, which are expressed not only in form, but also in the type of material used. This in turn determines the scope of their application.