Chaping machine for timber - the main element for the

Nowadays, the construction of wooden houses made of wooden lumber has gained great popularity. It is used not only in country houses and cottages, but also in houses for permanent residence. For the construction of such houses will need a lot of equipment and machines. Chaskorezny machine for timber with their own hands to perform very difficult and costly in financial terms, but in cramped everyday circumstances is quite capable.

Which machine to buy and how to choose? We will talk about this in this article.

Construction of houses

The popularity of wooden houses has gone far beyond the borders of our homeland, and they have become in demand on the European, American and many other continents. Such wide demand has arisen due to the use of advanced woodworking technologies. Due to this, such buildings surpass panel and brick houses.

Wooden buildings have many advantages, because they:

• Environmentally friendly;
• Warm;
• Durable;
• Durable;
• Easy to build.

Equipment for the construction of wooden houses can be purchased in specialized stores, both new and used. With the help of such special equipment, you will be able to implement any project with maximum profitability.

In the construction of the most demanded manual chaskorez, it is needed for the manufacture of cups on logs. In addition to it, a very necessary tool is a cup cutting machine for a bar.

It is necessary for various processing of timber:

• Trimming;
• cup cupping;
• milling under windows and doors.

The latest equipment is most needed because it allows you to significantly speed up the progress of work.

Tool selection

For non-professional construction work, experts strongly recommend purchasing the Hornet hand chisel-cutting machine. It is intended for the manufacture of castle connections in the construction of timber, and its small size, simplicity of construction and ease allow it to be used both on the construction site and in the workshop. (See also the article Docking beam by length - options for connections)

Thus, it can replace industrial woodworking equipment, which is problematic to transport to the construction site or use it as a tool for correcting marriages.

Important. The instruction of this machine means that they can mill grooves with a depth of up to 7.4 cm in bars with a width of 4 to 24 cm for castle joints in mutually perpendicular walls. If necessary, in hardware stores, you can change the configuration depending on the tasks and goals set for you.

Principle of operation

• The machine is fixed with the base (guides) on the workpiece and fixed;
• The processing unit is installed directly on the frame, and it in turn can slide along the base;
• The width of the groove is governed by the stops on the frame itself, and the depth is set on the processing unit;
• The process itself is carried out with the help of an end mill that has carbide soldering or replaceable knives.

In the machines "Hornet" for the working unit is used milling machine "Makita" - RP2300FC. It has a power of 2300 W, the ability to fine-tune the depth of milling, illumination of the working perimeter and ergonomic handle. The price for the standard equipment of this tool includes two cutters with carbide soldering with diameters of 4.4 and 1.9 cm (see also the article How can I use a non-planed timber)

A special frame is mounted on the beam, and a working unit is mounted on it. This installation allows you to move the router in transverse and longitudinal directions.

Important. If desired, you can change the completeness of your chop cutter. This will be able to increase the thickness of the processed bars up to 28 cm and cut the type of bay window and locking at angles from 45 to 135 degrees. Also, you have the opportunity to cut a dovetail groove.

Features and benefits

Serious loads on this equipment during operation, namely on the milling unit of the machine, prompted the need to use a reliable and powerful milling unit in this model.

As we already said above, one of the most powerful manual milling machines Makita is used for the milling unit in this model.

It has the following features:

• Power 2.3 kW;
• Processing depth 0 - 7 cm;
• Exact setting of milling depth;
• Soft and ergonomic handles;
• Fixing the power button in the pressed position;
• LED backlight for work area.

Important. Mobile Hornet machine can be equipped with a special cutter having a reusable removable sharpened knives made of hardened steel. The difference from solid type cutters having removable disposable non-refillable cutting inserts is that this tool has the ability to reduce the operating costs of the machine.

As far as productivity is concerned, an experienced worker spends an average of not more than five minutes milling two medium sized slots (including marking, setting up and reinstalling the glass). Consequently, the performance can be equal to not less than one hundred fifty cubic meters of timber per month.

Conclusion

A chamke-cutting machine for timber is a real valuable assistant during the construction of wooden houses or any carpentry work. It allows you to perform work more efficiently and in significantly less time, and its manual counterparts allow it to be used directly on construction sites. (See also the article What are the advantages of cedar glued laminated timber)

In the presented video in this article you will find additional information on this topic.