Deprecated: preg_match(): Passing null to parameter #2 ($subject) of type string is deprecated in /web/blog-oremonte.ru/page.php on line 13
Calculator - how to calculate the beam on the house: - Blog about repair

Calculator - how to calculate the beam on the house:

02-04-2018
Building

Log houses for many years have been in great demand, and experts say that this will continue. It is very easy to explain this popularity, because the timber buildings have good thermal performance, environmental cleanliness and durability.

In this article we will consider a construction calculator how to calculate a timber for a house, how much auxiliary materials and other parameters of the future wooden structure will be needed.

Appearance of the service

Knowledge required for calculations

Is it a lot or a little one cubic meter of lumber? And how many crowns built it enough? A cubic meter is not so much, for example, there will be only four bars with a length of six meters with a height and width of 20 centimeters per cube. But you need to be careful when buying, because sellers like to reduce the number in the smaller direction.

Tip: To avoid such an unpleasant situation, you need to use the calculator for calculating a house from a bar.

Photo unloading at the construction site

The advantages of working with online calculators

It is obvious that no one will argue that such a calculation will be inconvenient or inaccurate, and even, on the contrary, it will have many advantages.

We offer to consider them:

  • Thanks to these services, you can look at the comparative costs of building several projects you like;
  • It is possible to quickly calculate the cost of buildings with different parameters and configurations, layouts and areas;
  • Derived at the end of the calculation price for the construction project will help you decide what is more profitable for you;
  • Easy to operate service.

To obtain results, most calculators will need to enter the requested data, for example, such as:

  • The required area of ​​the house;
  • Type of roof, floor, foundation;
  • Materials used for the construction of walls, etc.
Creating a floor

The simplest way to calculate

In the previous section, we obtained the number of required profiles for construction, and now we will look at the question of how to calculate the timber per house in cubic meters.

We know the dimensions of our bars, and therefore we can easily calculate the volumes, for this we use the formula:

  • V=h*b*l
  • Where l is long;
  • b - width;
  • h - height.

For our case, we get:

V = 0.15 * 0.15 * 6 = 0,135 m3.

And now let's calculate how many units are contained in one cubic meter:

N = 1 / 0,135 = 7.4 p.

It’s clear that no one will cut the six-meter lumber, so you have to buy eight or seven bars.

To build a house, we need a lot of materials, for this we take the resulting number (one hundred and five), and multiply by the area of ​​one board:

Ncommon= 0.135 * 105 = 14.18 m3.

Construction of a large object from a bar

Conclusion

In this article we told how to calculate a house from a bar, and also gave a small example of calculations. You can use them, but it is best to use a special calculator, it will be much faster and more accurate. In the presented video in this article you will find additional information on this topic.