Betonolom: how to earn money with this tool, how to choose

It is no secret that today such a service as a concrete breaker for rent is very much in demand.

In this article we will see if this is true, whether it is worth investing in such a tool for renting it, and consider what types of breakers are on the market. We will review all the advantages and disadvantages of this equipment.

Let's start with the main question.

Why rental breakers are in demand

It's really very simple here.

Во-первых, эта услуга обречена на популярность, прежде всего потому, что в стране регулярно производится огромное количество самостоятельных ремонтов в квартирах и частных домах. А поскольку каждый третий ремонт подразумевает перепланировку помещений, то вполне естественно, что без бетонолома просто напросто тяжело обойтись. Потому что демонтажные работы в основном связаны как раз с разрушением именно бетона (см.также статью «Анкерные болты по бетону – разновидности и принцип устройства»).

Please note that in some cases, an industrial bump will be irrelevant for dismantling. For example, if we are talking about the destruction of a brick partition or masonry of foam blocks, then it is quite possible to do with a conventional perforator.

Agree that an ordinary private trader to acquire expensive equipment for one-time work simply does not make sense. But to rent it - is another matter.

Secondly, a pneumatic breaker for rent (or any other) is very often required by construction teams that repair industrial buildings. It also turns out that in most cases it is easier and cheaper for them to take such a tool for rent than to buy it - after all, the price of this equipment is considerable.

In addition, betons there are different, and each of them is designed to solve some specific problems. Therefore, if we talk about a one-time purchase of such an instrument, the teams would have to buy all types of equipment at the same time. And this is not everyone can afford.

And, in general, if there are no constant volumes of such work, then such a purchase is simply inexpedient, because it is not very clear when the acquisition will pay off.

Tip: as an additional income direction, you can try to organize another such thing as cutting reinforced concrete with diamond circles. This service is also popular with the public, because it is often necessary to cut an opening or a neat niche in the monolith. And for laying communications, a service such as diamond drilling of holes in concrete will be relevant.

And the third argument in favor of the acquisition of bettors for renting.

This tool is maintainable, and this means in practice that it can always be sold. That is, having invested in such equipment, the owner will pay for it fairly quickly by renting it out, and then, if desired, he can sell it without any problems.

In addition, often breakers buy for their own large-scale work in the first place, and only then they rent this tool.

So the reasons for acquiring such equipment may be different initially. And in general, it makes no sense to buy it only when there is no one to offer for rent. Immediately or subsequently.

How to determine if clients are possible for such a service in your particular case? Of course, it cannot be said here clearly, whether the business will go 100% or not, but it’s quite realistic to weigh some factors objectively.

Pay attention that the most important factor of a positive decision towards the organization of such a service is still the high purchasing power of the population in your region. That is, quite simply, the people must have money. Otherwise, what kind of capital repairs can be discussed at all - after all, as a rule, without money, everything is done with our own hands and with an improvised tool, without interest in paid services.

In principle, we figured out the theory, and if you decide to continue studying the topic, then let's now look at how to choose concrete breakers and what they actually are.

Types of betons

Concrete breakers are industrial - that is, those that work as a kind of “nozzle” on an excavator, for example. They can not only destroy concrete, but also cut reinforcement in it (find out here what a concrete hardening accelerator is).

There are also smaller tools that are quite compact devices and which can be easily controlled by a person.

This article deals with the second type of breakers.

So, brief instructions and general tips on choosing this tool in the detailed table.

We reviewed general recommendations - as you can see, there is nothing complicated here.

Note! Pay attention not only to the above points, but also to the tool manufacturer. Those brands that are widely known, have proven themselves quite well and you can safely buy them. But unknown firms, or absolutely frankly cheap "Chinese", are definitely taking risks.

Let's now deal with the features of each particular type of beton.

Power tools

In fact, electric breakers are high-power equipment with a very high impact speed.

Due to this quality, they can be used to solve such problems:

1. For the destruction of large stones and concrete blocks.
2. For the demolition of industrial and emergency buildings.
3. For destruction of the bases of all types.
4. For dismantling runways, etc.

Care must be taken to ensure that electrical tools of this type are made of really good metal, and also that the bump stop motor is reliably protected from dust and abrasives.

If there is no such protection, then due to the fact that when concrete breaks into the air, the mass of small pebbles rises, they are likely to get inside the engine. And this is fraught with instant failure. Therefore, make sure that the protective cover is present, and there are no gaps in its attachment points.

As for the features of this type of breakers, this is such a moment as the impossibility of autonomous work - it always requires the availability of electricity at the facility.

But in general, the device is very, very good and comfortable.

The next type of tool.

Pneumatic chippers

Any hydraulic breaker that works with compressed air is good because it can be used for a wide range of tasks:

1. For the dismantling of asphalt and concrete pads.
2. For redevelopment of premises in industrial and residential buildings;
3. For the destruction of foundations, etc.

Arranged tool is very simple - compressed air through a sleeve or hose is fed into the piston, which in turn begins to move the hammer.

The main features of this type of pneumatic equipment are as follows:

1. The tool has increased power and almost does not break due to the fact that there are no boards and parts that would be afraid of shock, vibration.
2. Concrete breakers of this type can work for a very long time without any overheating.
3. There are no sparks inside the structure of the product during operation, which is very important in some industries.
4. To control the tool is very easy due to the fact that it practically does not vibrate in the hands.

If we talk about the shortcomings, we can highlight the high cost of good quality equipment, and the fact that the air in the compressor must somehow be pumped. As a rule, for this purpose, electric energy or stations operating on liquid fuel are used.

Pay attention to the fact that this type of breakers is also convenient due to the fact that several dampers can work from one compressor at once.

It turns out that it is very important to choose the right compressor. So that the power gives out good, and worked economically.

Now take a look at another device.

Petrol bumpers

Gasoline breaker is very simple - the bump is driven by a standard motor, which in turn is powered by gasoline.

This is a very mobile equipment that is not tied to the availability of electricity at the facility.

Designed motobetonol to solve such problems:

1. For dismantling brick structures and concrete.
2. For the destruction of asphalt and a layer of frozen soil.
3. For dismantling floors in apartments and houses.

The tool differs in the increased service life, very good power, and also compactness.

The disadvantages include the following points:

1. Noise during operation. This is a consequence of the work of the gasoline engine.
2. The presence of exhaust gases.
3. Vertical use only.

The main criterion for choosing a gasoline breaker is to be able to find a tool with optimal fuel consumption at normal output power. And here it is better not to save, as a cheap chipper of this type, by default, cannot be qualitative and effective.

In principle, this is where our review of bethers and the general situation around such a service as the provision of these tools is completed.

Let's summarize.

Conclusion

It turns out that concrete breakers for rent is a really profitable business. But only in those cities and regions where there are apartment buildings and industrial buildings that are constructed with the use of monolithic concrete (also learn how concrete dust removal is performed).

If there is no such infrastructure, then it will simply be difficult for you to find clients for the rental of a tool such as an electric breaker or any other. But if there are such buildings and there are a lot of them, then you definitely need to be puzzled by the search and choice of such a tool. In the additional video in this article you can still find a lot of useful information about concrete breakers of all types.