Bar or aerated concrete: material comparison

15-01-2018

Building

Quite often, when designing a building, it is very difficult to choose material for building walls, since in the modern market of building materials you can find just a huge number of different types of them, which have similar characteristics and almost the same value. Therefore, among the masters often arise disputes on this issue. At the same time, it is often discussed among them that a timber or aerated concrete is better, given the popularity of these materials lately.

Amateur photo of the wall of aerated concrete blocks and timber from the array

Comparative characteristics

For a start it is worth saying that the blocks are usually manufactured using a strictly defined technology, but may have different dimensions. In this case, the timber is not only of different size, but also has a different component, ranging from wood and ending with composite products. Therefore, deciding on the fact that it is better to have a house made of timber or aerated concrete, you should consider the standard options, without various additions and modifications.

In some regions of the country, lumber production is much better than the manufacture of blocks from various cement-containing mixtures.

Cost of

First of all, it is necessary to say that it is necessary to compare both of these materials taking into account logistics. The fact is that in some areas of the country it is much easier to buy blocks of concrete than to buy wood products. That is why it is determined that a house made of lumber or aerated concrete is cheaper, taking into account the nearest production of these materials and their delivery to the object.

Glued products have their own specific properties that differ from solid wood, but at the same time their cost is usually several times higher

It is worth noting that in most cases both of these types of products have approximately the same cost, given their transportation and unloading. Based on this, the price in this case is not the main or fundamental factor.

Tip! In areas where wood is very small and it is very expensive, it is wiser to use blocks of aerated concrete to build a house.

Bar-shaped houses can be installed on piles, and block constructions require a solid base or a grillage.

Specifications

Recently projects of the combined houses from a bar and a gas concrete became popular.

This is due to the fact that both of these materials have approximately the same characteristics.

Structures made of aerated concrete are usually warmed from the outside, and buildings made of solid wood usually have a good appearance and protection from the cold is preferably used from the inside.

They have the same strength., allowing you to create a house with a height of more than two floors, taking into account the attic.
The thermal conductivity of these products is also approximately at the same level.but the unit still needs extra protection from the cold. However, if we consider the operation in regions with a harsh climate, then the wood requires appropriate insulation.

If you use laminated veneer lumber, then you can finish immediately after the construction of the building, since only he from all such lumber does not shrink

Analyzing the stability of products before moisture, it should be said that aerated concrete or laminated veneer lumber behave approximately equally in high humidity.. However, if solid wood materials are used, they need additional protection and special treatment.
Separate attention deserves the environmental component. The fact is that the tree is in the first place for its safety and purity. At the same time, it is treated with various impregnations, which not only protect it from moisture, insects or fire, but also reduce performance to the level corresponding to aerated concrete.

The manufacture of log houses involves the creation of special joints and seals between the crowns, which sometimes takes a lot of time.

It is important to remember that the installation manual usually involves the subsequent trimming of houses made of aerated concrete to insulate them and give a good appearance. At the same time, the construction of the timber and so it looks great.

Tip! All the advantages and disadvantages of the characteristics of these materials should not be considered separately, but in the design of a particular building and subsequent processing.

Installation

It is believed that cutting of reinforced concrete with diamond circles as the most difficult and expensive work is not required when building houses from a bar. However, it must be remembered that this material requires the manufacture of seats, locks, connections and other structural elements that are made with the help of a saw, which is also quite difficult and costly.

The process of assembling a house using blocks is considered to be simpler and less time and effort is spent on it, which accordingly affects the cost.

Creating a project with your own hands, you need to remember that wood products need a certain time for shrinkage and shrinkage. Therefore, such houses after erection stand for one season. In this case, the house of the blocks can enter immediately after production.

When working with aerated concrete may require diamond drilling holes in concrete or other work of this type. However, with proper design, these processes can be minimized.

The beauty of houses made of wooden materials says the mother for herself and indicates the status and excellent taste of the owners.

It is important to remember that the blocks are compact and the walling process can be done by just one person. In turn, the timber has a fairly large size and weight, which implies the presence of an assistant.

Tip! Each master has his favorite materials for construction, which they use professionally. Therefore, in this situation, one should be guided by personal preferences and access to certain specialists.

Building blocks can not boast the original good appearance, but there are lots of materials for its subsequent decoration

Conclusion

After reading the video in this article, you can compare these materials in more detail. Also on the basis of the article above, it should be concluded that these products have approximately the same cost and quality, although they suggest a fundamentally different installation. Therefore, the final decision will always depend on the future residents or the customer.