Bar 100 to 100 to 150 to 150 - choose the material

Nowadays, timber is very often used for the construction of private houses. Environmental friendliness and high technical characteristics make this material one of the most popular in private housing construction. From it you can build buildings of any size and shape, ranging from a small country house and ending with a cottage in two or more floors.

The topic of this article will be timber 100x150. We will look at the types and characteristics of this building material, and also calculate what quantity will be needed for the implementation of a specific project.

Using timber as a building material

The increased interest in lumber buildings is very easy to explain, given the high technical characteristics of this building material. If we talk about the baths, then these buildings are almost always lumber, because this building material is considered traditional.

A bath from a bar 100x150 - built with your own hands - this is not only simplicity and high speed of erection. It is believed that through the use of this building material, creates a unique microclimate characteristic of Russian baths.

The advantages of timber

The main competitor of timber on the market is the edged board.

Therefore, we consider both the general advantages of this material and specifically before the edged board:

1. Price. Everyone knows that wood is cheaper than most modern building materials. In turn, the timber is cheaper than the board.

1. Easy to install. Installing a log house with your own hands is not only quick, but also simple. In this case, the installation manual provides for two stages: the installation of the bars and the laying of an inter-rope insulation.

Tip! If you choose profiled timber for construction, this will greatly simplify the process of building the house, since this material has a special system of adhesion between the elements.

1. Tradition. Houses made of log are traditional in Russia. And because many residents of large cities, looking for outdoor recreation, choose this material for their country houses.
2. The bar 150х100 is not the only size of this building material. There are various sections of the bars, which gives you a huge scope for design solutions.

1. If you use glued or shaped timber in construction, the building will not need either internal or external finishing. These walls themselves have an aesthetic appearance.
2. Lumber buildings “breathe”, which creates a unique microclimate and atmosphere in a country house.
3. Such buildings are distinguished by minimal shrinkage.
4. Greater than the boards, the thickness provides increased durability of the log walls, as well as resistance to environmental influences.

Types of bars used for construction

Many builders are interested in how much timber costs 150 by 100. The cost in this case depends on the type of material. Since technology does not stand still, a certain progress is present in the construction industry.

Therefore, today there are 3 types of timber that differ in appearance and styling features.

Consider them in more detail:

1. Building (normal). This material is traditional because it is a regular timber that has not undergone any additional processing. The cost of timber 100x150 is the lowest in comparison with the profiled and glued.

Tip! This type of material is subject to significant draft, which is 20 cm for a two-story building. Therefore, usually finishing work begins six months or a year after construction.

A significant drawback of the material is the caulker mezhventsovykh seams. The fact is that evenly caulking them is a rather difficult task, besides, the seams are most often inaccurate. In this regard, it is necessary to produce decoration of such buildings, both outside and inside.

Tip! Through the finishing work, you can put a layer of insulation between the wall and the cladding. This will provide comfort and warmth in your home in any bad weather. Especially important additional insulation is in homes where year-round living is planned.

1. The profiled bar is distinguished by a complex section, which ensures a reliable adhesion of the elements to each other. Thanks to the profiling, moisture penetration into the structure of the inter-heater insulation is eliminated, such walls also prevent winds and cold (read also the article Production of profiled timber - technology features and the final result).

Since the walls do not need a caulking iron, even without finishing they have an attractive appearance. The special adhesion of the elements provides warmth and excellent sound insulation in such houses, however, they are mostly suitable for seasonal living, since the beam 100 by 150 without finishing is difficult to heat.

Structures made of profiled material are practically not subject to deformation or shrinkage, but their construction should use special fastening elements of rafters and shrinkage bolts to minimize shrinkage.

1. Glued. The cost of timber 150 by 100 mm in this case is the highest.

This material is credited with the highest quality and reliability. Its production is based on gluing several lamellae, which are pre-dried. After the material is glued, it is laid under the press.

All defective areas in the process are eliminated. This allows the end product to be more attractive and durable. Also, to increase the strength alternates the direction of wood fibers, that is, each subsequent layer is laid perpendicular to the previous one.

Conclusion

The cost of construction of a timber construction is more dependent on the selected material. And the choice already depends on the requirements for the future home and your material capabilities. The video in this article has prepared an exhaustive review on the topic reviewed, look!